Spatial Distribution of Wheat Threshed Mixture and Theoretical Cleaning-Airflow Velocity Boundaries in a Single Longitudinal Axial-Flow Combine Harvester
IOSR Journal of Mechanical and Civil Engineering · 2026-09 · 23 (5) · 70-84
DOI: 10.9790/1684-2305017084 ↗Kurz gefasst
Fachartikel in der Zeitschrift IOSR Journal of Mechanical and Civil Engineering, 2026-09. Verfasst von Peng Liu und 5 weiteren Autor:innen.
Abstract (Originalsprache)
During the operation of a single longitudinal axial-flow wheat combine harvester, the threshed mixture is often unevenly distributed on the cleaning sieve, leading to locally thick material layers, increased cleaning losses, and higher impurity content. To address this problem, this study investigated the spatial distribution characteristics of wheat threshed mixture on the cleaning sieve and measured the critical terminal velocities of key components. Based on these results, theoretical cleaning-airflow velocity boundaries were analyzed. A self-developed 4LZ-2.5 test bench was used. The cleaning sieve was divided into six regions using a full-width grid sampling method. The regional distribution characteristics of plump grains, unthreshed heads, long stalks, short stalks, and chaff and light impurities were quantitatively characterized. Meanwhile, a critical terminal velocity test apparatus was used to determine the critical terminal velocities of the main components. The results showed that, under the single longitudinal axial-flow condition, the wheat threshed mixture exhibited a distinct frontconcentrated and rear-sparse longitudinal distribution pattern and a right-biased transverse deposition pattern on the cleaning sieve. In particular, plump grains accounted for 70.52% of the material in the front-right region of the sieve, namely Zone 1-a, suggesting that this region may be prone to locally high material accumulation and increased airflow penetration resistance. The average critical terminal velocities of plump grains, long stalks, unthreshed heads, short stalks, and chaff and light impurities were 7.51, 6.13, 5.65, 4.22, and 2.12 m/s, respectively. The critical terminal velocity of unthreshed heads was lower than those of plump grains and long stalks, indicating that unthreshed heads could be regarded as the sensitive recoverable component for defining the upper boundary of cleaning airflow velocity. Considering both the removal requirement of chaff and light impurities and the recovery requirement of unthreshed heads, the mean-based theoretical control range of cleaning airflow velocity was preliminarily estimated as 2.12-5.65 m/s. The analysis further indicated that conventional uniform airflow is difficult to simultaneously satisfy the airflow penetration requirement in high-load regions and the lowloss cleaning requirement in low-load regions. Therefore, a zone-differentiated airflow distribution strategy may improve the matching relationship between cleaning airflow and the non-uniform material distribution on the sieve. These results provide data support and a theoretical reference for parameter setting and structural optimization of non-uniform airflow cleaning systems in single longitudinal axial-flow wheat combine harvesters.
Zitieren
APA
Liu, P., Wang, X., Jin, C., Liu, M., Huang, Z., & Li, A. (2026). Spatial Distribution of Wheat Threshed Mixture and Theoretical Cleaning-Airflow Velocity Boundaries in a Single Longitudinal Axial-Flow Combine Harvester. IOSR Journal of Mechanical and Civil Engineering, 23(5), 70-84. https://doi.org/10.9790/1684-2305017084
Vancouver
Liu P, Wang X, Jin C, Liu M, Huang Z, Li A. Spatial Distribution of Wheat Threshed Mixture and Theoretical Cleaning-Airflow Velocity Boundaries in a Single Longitudinal Axial-Flow Combine Harvester. IOSR Journal of Mechanical and Civil Engineering. 2026;23(5):70-84. doi:10.9790/1684-2305017084
BibTeX
@article{Liu2026,
author = {Liu, Peng and Wang, Xiangyou and Jin, Chengqian and Liu, Mingming and Huang, Zongjing and Li, Aihai},
title = {Spatial Distribution of Wheat Threshed Mixture and Theoretical Cleaning-Airflow Velocity Boundaries in a Single Longitudinal Axial-Flow Combine Harvester},
journal = {IOSR Journal of Mechanical and Civil Engineering},
year = {2026},
volume = {23},
number = {5},
pages = {70--84},
doi = {10.9790/1684-2305017084}
}
EUVIMED