EUVIMEDEUVIMED entdecken
Crossref

Stress Analysis On Welded Joints Of A Storage Tank Using Solidworks 2020

M. Andri Aditya Almahesa, Ahmad Zamheri, Rizky Yuliandi, Aneka Firdaus, Amrifan Saladin Mohruni, Jimmy Dn, Hendri Chandra, Agung Mataram

IOSR Journal of Mechanical and Civil Engineering · 2026-03 · 23 (3) · 24-30

DOI: 10.9790/1684-2303012430 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IOSR Journal of Mechanical and Civil Engineering, 2026-03. Verfasst von M. Andri Aditya Almahesa und 7 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study analyzes stress distribution, strain, and displacement in welded joints of a fixed cone roof storage tank using the finite element method (FEM) with SolidWorks 2020. The tank design follows API 650 standards and uses ASTM A283 steel material. The objective is to identify critical stress regions and evaluate the structural safety of the tank under internal pressure loading. A numerical simulation was performed by applying an internal pressure of 0.08387 MPa to the tank model. The results show that the maximum Von Mises stress is 74.73 MPa, which is significantly lower than the material yield strength, indicating that the structure remains within the elastic region and is considered safe under operating conditions. The highest stress concentration occurs in the welded joint area, which is identified as the critical region of the structure. In addition, the maximum displacement obtained from the simulation is 4.027 mm, which is still within acceptable limits. The findings demonstrate that the application of FEM using SolidWorks provides an effective and reliable approach for evaluating the mechanical behavior and structural integrity of welded storage tanks.

Zitieren

APA

Almahesa, M. A. A., Zamheri, A., Yuliandi, R., Firdaus, A., Mohruni, A. S., Dn, J., Chandra, H., & Mataram, A. (2026). Stress Analysis On Welded Joints Of A Storage Tank Using Solidworks 2020. IOSR Journal of Mechanical and Civil Engineering, 23(3), 24-30. https://doi.org/10.9790/1684-2303012430

Vancouver

Almahesa MAA, Zamheri A, Yuliandi R, Firdaus A, Mohruni AS, Dn J, et al. Stress Analysis On Welded Joints Of A Storage Tank Using Solidworks 2020. IOSR Journal of Mechanical and Civil Engineering. 2026;23(3):24-30. doi:10.9790/1684-2303012430

BibTeX
@article{Almahesa2026,
  author = {Almahesa, M. Andri Aditya and Zamheri, Ahmad and Yuliandi, Rizky and Firdaus, Aneka and Mohruni, Amrifan Saladin and Dn, Jimmy and Chandra, Hendri and Mataram, Agung},
  title = {Stress Analysis On Welded Joints Of A Storage Tank Using Solidworks 2020},
  journal = {IOSR Journal of Mechanical and Civil Engineering},
  year = {2026},
  volume = {23},
  number = {3},
  pages = {24--30},
  doi = {10.9790/1684-2303012430}
}
Kostenlos starten →