EUVIMEDEUVIMED entdecken
Crossref

Optimization Of The Compressive And Flexural Strength Of Sand - Lateritic Concrete Using Scheffe’s And Osadebe’s Theories

Onyeike, Ogwumike Onyeike, Prof Festus Chukwudi Onyeka

IOSR Journal of Mechanical and Civil Engineering · 2026-02 · 23 (2) · 42-89

DOI: 10.9790/1684-2302014289 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IOSR Journal of Mechanical and Civil Engineering, 2026-02. Verfasst von Onyeike und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This thesis focuses on optimizing the compressive and flexural strengths of sand-lateritic concrete. It involves casting concrete cubes and prototype sand-lateritic concrete beams. In total, ninety (90) sand-lateritic concrete cubes measuring 150 × 150 × 150 mm and ninety (90) prototype sand-lateritic beams measuring 600 × 150 × 150 mm were cast according to the employed mix proportions. The test specimens were cured for 28 days and then tested. Portions of the comprehensive test results were used to formulate models based on Scheffé’s and Osadebe’s theories, while portions of the flexural test results were used to formulate models based on Scheffé’s and Osadebe’s theories for predicting the flexural strengths of sand-lateritic concrete. The adequacies of the models were evaluated and confirmed using Fisher and Student’s T-tests. Computer programs based on these models were developed in the QBASIC language. The developed programs can predict concrete mix proportions given a desired compressive or flexural strength, and vice versa. The predicted compressive and flexural strength values from the models agreed with the corresponding experimental results, as well as with each other. The optimum compressive and flexural strengths correspond to the mix ratios 0.51:1:2.25:0.25:4 and 0.535:1:1.85:0.65:5, yielding 19.15 N/mm² and 2.37 N/mm², respectively. Thus, incorporating some laterite into the mix proportioning is feasible since the optimum strengths fall within the acceptable range. Hence, the formulated models can be used to predict the compressive and flexural strength of sand-lateritic concrete with accuracy

Zitieren

APA

Onyeike, Onyeike, O., & Onyeka, P. F. C. (2026). Optimization Of The Compressive And Flexural Strength Of Sand - Lateritic Concrete Using Scheffe’s And Osadebe’s Theories. IOSR Journal of Mechanical and Civil Engineering, 23(2), 42-89. https://doi.org/10.9790/1684-2302014289

Vancouver

Onyeike, Onyeike O, Onyeka PFC. Optimization Of The Compressive And Flexural Strength Of Sand - Lateritic Concrete Using Scheffe’s And Osadebe’s Theories. IOSR Journal of Mechanical and Civil Engineering. 2026;23(2):42-89. doi:10.9790/1684-2302014289

BibTeX
@article{Onyeike2026,
  author = {Onyeike and Onyeike, Ogwumike and Onyeka, Prof Festus Chukwudi},
  title = {Optimization Of The Compressive And Flexural Strength Of Sand - Lateritic Concrete Using Scheffe’s And Osadebe’s Theories},
  journal = {IOSR Journal of Mechanical and Civil Engineering},
  year = {2026},
  volume = {23},
  number = {2},
  pages = {42--89},
  doi = {10.9790/1684-2302014289}
}
Kostenlos starten →