Predictive Modelling Of Wax Deposition Effect On Concentration For Corrosion Of Crude Oil Pipeline
IOSR Journal of Mechanical and Civil Engineering · 2026-02 · 23 (2) · 35-41
DOI: 10.9790/1684-2302013541 ↗Kurz gefasst
Fachartikel in der Zeitschrift IOSR Journal of Mechanical and Civil Engineering, 2026-02. Verfasst von Nnorom Obinichi und 1 weiteren Autor:innen.
Abstract (Originalsprache)
The aim of this research is to develop a Predictive model for wax deposition effect on concentration for corrosion of crude oil pipeline. Wax is one of the most common components in crude oil and generates corrosion inhibition by wax deposition or formation on the internal surface of the pipeline, reducing the corrosion. Waxy crudes characteristics vary from location to location. A flow loop was designed and developed to carry out series of experiment for the crude oil pipeline for the effect of wax deposit on CO2 corrosion. The linear polarization resistance technique was used to measure the corrosion rate in mils per year (mpy) against time (minutes) using MS1000 Corrosion Meter. A mathematical model was developed to predict the concentration effect on wax deposit on corrosion for a cylindrical crude oil pipeline based on principle of mass, heat and material balance of mass. MATLAB software was used for simulation with the experimental results and the input parameter from the wax physical properties and operating conditions. Based on the analysis, it was observed that at flow rate of 10.21 L/min and temperature at 15oC during the corrosion inhibition. At time 18 minutes, the experimental result predicted a significant reduction of corrosion rates and excellent corrosion protection and the model result predicted a significant reduction of corrosion rates while others gave only moderate or negligible protection to the crude oil pipeline. From the profile plot, the values of the corrosion rate (mpy) against time (min) of the experimental and model results are 3 (0.68 mpy, 0.81 mpy), 6 (0.82 mpy, 0.696 mpy), 9(0.54 mpy, 0.582 mpy), 12 (0.61 mpy, 0.468 mpy), 15 (0.35 mpy, 0.354 mpy), 18 (0.15 mpy, 0.24 mpy). But the variation of the experimental and model results in terms of deviation indicate that both results are insignificant in variation, showing positive agreement between the experimental and model results. It has been found that as the deposition of the paraffin wax increases the corrosion rate decrease. This proves that paraffin wax deposition on the steel pipe act as a protective layer to inhibit corrosion.
Zitieren
APA
Obinichi, N., & Uchegbulam, I. (2026). Predictive Modelling Of Wax Deposition Effect On Concentration For Corrosion Of Crude Oil Pipeline. IOSR Journal of Mechanical and Civil Engineering, 23(2), 35-41. https://doi.org/10.9790/1684-2302013541
Vancouver
Obinichi N, Uchegbulam I. Predictive Modelling Of Wax Deposition Effect On Concentration For Corrosion Of Crude Oil Pipeline. IOSR Journal of Mechanical and Civil Engineering. 2026;23(2):35-41. doi:10.9790/1684-2302013541
BibTeX
@article{Obinichi2026,
author = {Obinichi, Nnorom and Uchegbulam, Ifeanyi},
title = {Predictive Modelling Of Wax Deposition Effect On Concentration For Corrosion Of Crude Oil Pipeline},
journal = {IOSR Journal of Mechanical and Civil Engineering},
year = {2026},
volume = {23},
number = {2},
pages = {35--41},
doi = {10.9790/1684-2302013541}
}
EUVIMED