Prediction Of Strength Properties Of Concrete Blended With Pentaclethra Macrophylla Benth Husk Ash And Artocarpus Altilis Husk Ash Using R-Programming
IOSR Journal of Mechanical and Civil Engineering · 2026-01 · 23 (1) · 11-32
DOI: 10.9790/1684-2301021132 ↗Kurz gefasst
Fachartikel in der Zeitschrift IOSR Journal of Mechanical and Civil Engineering, 2026-01. Verfasst von UKPABI Okoronkwo Daniel und 1 weiteren Autor:innen.
Abstract (Originalsprache)
This research investigates the influence of Penterclethra Macrophylla Benth Husk Ash which is the Scientific name for African Oil Bean Husk Ash (OBHA) and Artocarpus Altilis Husk Ash which is also the Scientific name for Breadfruit Husk Ash (BHA) as partial replacements for Ordinary Portland Cement (OPC) on slump, setting time, and mechanical properties of Concrete, specifically compressive, flexural and split tensile strengths. Fine aggregate passing a 5.00 mm BS sieve and 20 mm maximum size crushed aggregate were used. OBHA and BHA, both finely ground, were used in equal proportions to replace OPC at 0%, 5%, 10%, 15%, 20% and 30% by weight. Concrete samples in the form of cubes (150 mm x 150 mm x 150 mm), beams (150 mm x 150 mm x 700 mm), and cylinders (150 mm diameter x 300 mm height) were prepared, cured and tested at 3, 7, 14, 21, 28 and 90 days. A water-cement ratio 0.6 and a mix ratio of 1: 2.14: 4.18 were maintained throughout. Slump test results indicated an increase in workability with higher OBHA/BHA content, with all values within acceptable limits. Both initial and final setting times increased with increasing OBHA/BHA percentages, indicating a retardation of the hydration process. Initial setting times ranged from 137 minutes at 5% replacement to 165 minutes at 30%. Mechanical testing showed that Compressive, Flexural and Split Tensile Strengths generally decreased as the level of OBHA/BHA increased, although strength development progressed over curing time. The Compressive, Flexural, and Split Tensile Strength of concrete obtained ranges from (3.65N/mm2 – 29.84N/mm2 ), (0.50N/mm2 – 3.79N/mm2 ) and (0.28N/mm2 – 2.06N/mm2 ) respectively. At 28 days, the highest strengths were observed at 5% replacement, with strengths of 23.13 N/mm2 , 3.10 N/mm2 and 1.50 N/mm2 , compared to control samples (0% replacement) which achieved 26.04 N/mm2 , 3.49 N/mm2, and 1.69 N/mm2 respectively. Additionally, predictive mathematical models for the mechanical properties of OBHA/BHA blended concrete were developed and validated using R-Programming software. The model confirms that strength increases with curing time, with the most rapid gains in the first 7-14 days. The logarithmic relationship suggests diminishing returns with extended curing. Therefore, the developed model successfully captures the complex relationships between cement content, curing age, and mechanical strengths. It provides both accurate predictions and practical optimization capabilities for concrete mix design. The excellent statistical metrics and logical coefficient signs confirm the model's validity for the tested conditions. These findings suggest that moderate OBHA/BHA replacement can enhance sustainability in concrete production, though higher replacement levels reduce strength. Significance: The significance of this study lies in its contribution to the understanding of the effects of oil bean husk ash on concrete produced with breadfruit husk ash. The findings of this study will provide valuable insights for Engineers, Architects, and Construction professionals on how to look after concrete structures containing admixtures like OBHA and BHA. This Study offers an opportunity to contribute to sustainable construction practices by exploring the potential of agricultural waste products in concrete. The use of agricultural waste materials in concrete production has gained attention due to its potential benefits in sustainability and cost reduction. Oil bean husk ash (OBHA) and breadfruit husk ash (BHA) are two such materials that can be used as admixtures in concrete. By understanding the effects of Oil bean husk ash on concrete produced with breadfruit husk ash, and providing recommendations on optimal proportions of oil bean husk ash and breadfruit husk ash in concrete, this study will contribute to the development of more durable and safer structures. Similarly, by evaluating the impact of OBHA on the mechanical properties of concrete with BHA, you can gain valuable insights into the use of these alternative materials. Also by exploring the synergistic effects of OBHA and BHA in concrete, the study will contribute to the development of ecofriendly construction materials that not only reduce environmental impact but also enhance the performance and longevity of concrete structures. Another significance of this thesis is that research paper will be published that will be used as an academic tool to help students handle similar or related thesis with confidence.
Zitieren
APA
Daniel, U. O., & Anizoo, U. O. (2026). Prediction Of Strength Properties Of Concrete Blended With Pentaclethra Macrophylla Benth Husk Ash And Artocarpus Altilis Husk Ash Using R-Programming. IOSR Journal of Mechanical and Civil Engineering, 23(1), 11-32. https://doi.org/10.9790/1684-2301021132
Vancouver
Daniel UO, Anizoo UO. Prediction Of Strength Properties Of Concrete Blended With Pentaclethra Macrophylla Benth Husk Ash And Artocarpus Altilis Husk Ash Using R-Programming. IOSR Journal of Mechanical and Civil Engineering. 2026;23(1):11-32. doi:10.9790/1684-2301021132
BibTeX
@article{Daniel2026,
author = {Daniel, UKPABI Okoronkwo and Anizoo, UBACHUKWU Obiekwe},
title = {Prediction Of Strength Properties Of Concrete Blended With Pentaclethra Macrophylla Benth Husk Ash And Artocarpus Altilis Husk Ash Using R-Programming},
journal = {IOSR Journal of Mechanical and Civil Engineering},
year = {2026},
volume = {23},
number = {1},
pages = {11--32},
doi = {10.9790/1684-2301021132}
}
EUVIMED