To Compare And Evaluate The Efficacy Of Minimizing Agents Used To Reduce The Oxygen Inhibition Layer Formation And Its Effect On Microhardness Of Composite Resin: An In-Vitro Study.
IOSR Journal of Dental and Medical Sciences · 2026-01 · 25 (1) · 46-51
DOI: 10.9790/0853-2501044651 ↗Kurz gefasst
Fachartikel in der Zeitschrift IOSR Journal of Dental and Medical Sciences, 2026-01. Verfasst von Dr. Priyanka Chavan und 5 weiteren Autor:innen.
Abstract (Originalsprache)
Background
The surface layer is exposed to air during polymerization when dentists light cure resin composite restorations in increments or after using an hand instrument to shape the surface layer. Clinical performance may be impacted by the existence of an oxygen-inhibited resin surface layer. Materials and Methods: 80 composite resin discs of dimension 10mm x 10mm were prepared using a Teflon mould. Nanohybrid composite resin was used with an initial shade A1. Light-curing was performed using a light emitting diode (LED) according to the manufacturer’s instructions (20 sec), with the light at 1 mm of distance and perpendicular to the surface of the specimens. The specimens were divided into 4 main groups. Group A: thick mylar strip. Group B: a thin layer of glycerine over the composite specimen. Group C: a uniform layer of K-Y Jelly. Group D: cured in open air. This was the control group. All the specimens were subjected to microhardness assessment. Vicker’s microhardness testing was done. Data obtained was recorded, tabulated and statistically analysed.
Results
Mylar strip has highest value of Vicker’s hardness (85.82), followed by KY Jelly (77.32), Glycerine (76.54) and the control group i.e., Air has lowest microhardness (48.6).
Conclusion
Within the limitations of the present study, it can be concluded that Mylar strip has the most superior performance in terms of specimen hardness and K-Y Jelly performs similar to glycerine application.
Zitieren
APA
Chavan, D. P., Patil, D. K., Daokar, D. S., Khan, D. S., Sarate, D. N., & Yeole, D. G. (2026). To Compare And Evaluate The Efficacy Of Minimizing Agents Used To Reduce The Oxygen Inhibition Layer Formation And Its Effect On Microhardness Of Composite Resin: An In-Vitro Study. IOSR Journal of Dental and Medical Sciences, 25(1), 46-51. https://doi.org/10.9790/0853-2501044651
Vancouver
Chavan DP, Patil DK, Daokar DS, Khan DS, Sarate DN, Yeole DG. To Compare And Evaluate The Efficacy Of Minimizing Agents Used To Reduce The Oxygen Inhibition Layer Formation And Its Effect On Microhardness Of Composite Resin: An In-Vitro Study. IOSR Journal of Dental and Medical Sciences. 2026;25(1):46-51. doi:10.9790/0853-2501044651
BibTeX
@article{Chavan2026,
author = {Chavan, Dr. Priyanka and Patil, Dr. Kalpana and Daokar, Dr. Sadashiv and Khan, Dr. Sana and Sarate, Dr. Nikita and Yeole, Dr. Gaurav},
title = {To Compare And Evaluate The Efficacy Of Minimizing Agents Used To Reduce The Oxygen Inhibition Layer Formation And Its Effect On Microhardness Of Composite Resin: An In-Vitro Study},
journal = {IOSR Journal of Dental and Medical Sciences},
year = {2026},
volume = {25},
number = {1},
pages = {46--51},
doi = {10.9790/0853-2501044651}
}
EUVIMED