Design And Construction of An Automated Target Counter for Military Application
IOSR Journal of Electrical and Electronics Engineering · 2026-03 · 21 (3) · 49-65
DOI: 10.9790/0853-2103014965 ↗Kurz gefasst
Fachartikel in der Zeitschrift IOSR Journal of Electrical and Electronics Engineering, 2026-03. Verfasst von Balogun Anthony Adeolu und 4 weiteren Autor:innen.
Abstract (Originalsprache)
This article presents the design and construction of an automated target counter for real-time detection and counting of projectile impacts using a piezoelectric vibration sensor, an ATmega328P microcontroller, signalconditioning circuitry, a 16×2 LCD, and an audible feedback system. The research was motivated by the limitations of conventional manual target counting methods, which are prone to human errors, delays, and safety concerns. Mathematical models were developed for impact force, kinetic energy, sensor response, ADC conversion, counting accuracy, percentage error, detection efficiency, and system response time. Using practical design parameters of a 0.05kg projectile mass, 25m/s velocity, and 0.002s impact duration, the impact force and kinetic energy were calculated as 625 N and 15.63 J, respectively. The sensor produced an output voltage of approximately 5V, which was processed through a 10-bit ADC with a resolution of 4.89mV/bit. A threshold value of 1.5 V (307 ADC counts) was established for reliable impact detection. Performance evaluation showed that the system successfully recorded 148 out of 150 actual impacts, resulting in a total counting error of 2 hits, an average percentage error of 1.07%, and an overall accuracy of 98.93%. The calculated system response time was 4.9ms, corresponding to a detection rate of approximately 204 impacts per second. The system also exhibited low power consumption of 0.55W with a current consumption of 110 mA. The results demonstrate that the developed automated target counter is a reliable, accurate, cost-effective, and energy-efficient alternative to manual target counting systems, making it suitable for military training, law enforcement exercises, sports shooting competitions, and related target monitoring applications.
Zitieren
APA
Adeolu, B. A., Fischer, A, G., Omini, & Uket, O. (2026). Design And Construction of An Automated Target Counter for Military Application. IOSR Journal of Electrical and Electronics Engineering, 21(3), 49-65. https://doi.org/10.9790/0853-2103014965
Vancouver
Adeolu BA, Fischer, A G, Omini, Uket O. Design And Construction of An Automated Target Counter for Military Application. IOSR Journal of Electrical and Electronics Engineering. 2026;21(3):49-65. doi:10.9790/0853-2103014965
BibTeX
@article{Adeolu2026,
author = {Adeolu, Balogun Anthony and Fischer and A, Gertrude and Omini and Uket, Ofem},
title = {Design And Construction of An Automated Target Counter for Military Application},
journal = {IOSR Journal of Electrical and Electronics Engineering},
year = {2026},
volume = {21},
number = {3},
pages = {49--65},
doi = {10.9790/0853-2103014965}
}
EUVIMED