Development and Optimization of a Laboratory-Scale Bubble Column Bioreactor for Bioethanol Fermentation: A Computational Approach
Journal of Chemical Engineering Research Progress · 30.06.2026 · 3 (1) · 136-158
DOI: 10.9767/jcerp.20646 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Chemical Engineering Research Progress, online erschienen am 30.06.2026. Verfasst von Abutu David und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 85 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0). Gefördert von: Petronas Malaysia.
Abstract (Originalsprache)
This study presents the design and optimization of a laboratory-scale bubble column bioreactor (BCB) for bioethanol fermentation. Python-based simulations in Google Colab were employed to analyze mass transfer dynamics, hydrodynamic behavior, and reactor scale-up strategies under varying aeration rates. Although ethanol production is an anaerobic process, oxygen transfer analysis was conducted to characterize reactor performance and establish oxygen-limited conditions suitable for Saccharomyces cerevisiae fermentation, incorporating mass transfer modeling, reaction kinetics, process control, and sparger design to enhance fermentation efficiency. To further enhance fermentation efficiency, Response Surface Methodology (RSM) was applied following a two-stage optimization approach. A working volume of 500 mL was defined using fermentation kinetics, including an oxygen uptake rate of 1.1 g O₂/g cells, biomass yield of 0.5 g/g glucose, and kLa of 50 h⁻¹. A perforated plate sparger with six 1.2 mm orifices achieved a gas velocity of 90.3 m/s and 2.68 mm bubble size. Aeration was dynamically controlled to maintain 0.002 g/L dissolved oxygen, while pH was regulated at 5.0–5.5 using NaOH dosing. These conditions yielded 44.3% ethanol. A full factorial design identified Time, Air Flow Rate, Cell Loading, and Bead Mass as significant factors. RSM with Central Composite Design confirmed a significant quadratic model (F = 14.14, p < 0.0001; R² = 0.9601, Adjusted R² = 0.9201). Cell Loading (F = 48.48) and Bead Mass (F = 26.53) had the strongest effects. Optimal conditions yielded 47.9% ethanol at 52.70 h, 1.55 L/min air, 1.51 g/L cells, and 47.20 g beads, with 0.84% prediction error. Copyright © 2026 by Authors, Published by Universitas Diponegoro and BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Förderung
- Petronas Malaysia
Zitieren
APA
David, A., Yussof, H. W., Aderemi, B. O., Ameh, A. O., & Agi, A. A. (2026). Development and Optimization of a Laboratory-Scale Bubble Column Bioreactor for Bioethanol Fermentation: A Computational Approach. Journal of Chemical Engineering Research Progress, 3(1), 136-158. https://doi.org/10.9767/jcerp.20646
Vancouver
David A, Yussof HW, Aderemi BO, Ameh AO, Agi AA. Development and Optimization of a Laboratory-Scale Bubble Column Bioreactor for Bioethanol Fermentation: A Computational Approach. Journal of Chemical Engineering Research Progress. 2026;3(1):136-158. doi:10.9767/jcerp.20646
BibTeX
@article{David2026,
author = {David, Abutu and Yussof, Hafizuddin Wan and Aderemi, Benjamin Olufemi and Ameh, Alewo Opuada and Agi, Augustine Aja},
title = {Development and Optimization of a Laboratory-Scale Bubble Column Bioreactor for Bioethanol Fermentation: A Computational Approach},
journal = {Journal of Chemical Engineering Research Progress},
year = {2026},
volume = {3},
number = {1},
pages = {136--158},
doi = {10.9767/jcerp.20646}
}
EUVIMED