EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Catalytic Valorisation of Water Hyacinth Cellulose through Biomimetic Hydrolysis: Integrating Structural Accessibility and Cooperative Acid Catalysis for Renewable Glucose Production

Mey Shelly Rikin, Tri Partono Adhi, Tjokorde Walmiki Samadhi, Setyo Yanus Sasongko

Bulletin of Chemical Reaction Engineering & Catalysis · 30.04.2027 · 22 (1) · 134-147

DOI: 10.9767/bcrec.20885 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bulletin of Chemical Reaction Engineering & Catalysis, online erschienen am 30.04.2027. Verfasst von Mey Shelly Rikin und 3 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0). Gefördert von: PT. Aimtopindo Nuansa Kimia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The catalytic conversion of lignocellulosic biomass into renewable sugars is a key step toward the development of sustainable bio-based chemicals and biorefineries. In this study, cellulose isolated from water hyacinth (Eichhornia crassipes), an abundant invasive aquatic biomass, was valorised through biomimetic hydrolysis using piperazinium dihydrogen sulfate (PDS) under mild reaction conditions. Sequential pretreatment was employed to remove non-cellulosic components and improve cellulose accessibility, resulting in a cellulose-rich material with a crystallinity index of 20.1% and fibril diameters of 5–20 nm. Hydrolysis experiments were conducted at cellulose loadings of 1–3 wt%, PDS concentrations of 0.122–0.244 M, and temperatures ranging from 50 to 90 °C. Transition metal ions (Mn, Cu, Fe, Zn, and Ni; 0.006 M) were incorporated as co-catalysts to investigate cooperative Brønsted–Lewis acid activation. The hydrolysis rate increased with increasing temperature, catalyst concentration, and cellulose accessibility, yielding apparent rate constants of 0.0010–0.0346 mmol.L⁻¹.min⁻¹. Kinetic analysis revealed fractional reaction orders of 0.80 with respect to cellulose concentration and 0.75 with respect to proton concentration, with activation energies ranging from 65 to 74 kJ.mol⁻¹ for the PDS only system. Fe- and Cu-assisted systems exhibited enhanced glucose formation, highlighting the importance of cooperative catalytic interactions during glycosidic bond cleavage. The results demonstrate that effective biomass valorisation depends on the integration of structural accessibility and catalytic activation, providing mechanistic insights for the development of sustainable routes for converting lignocellulosic biomass into renewable sugars and bio-based chemicals. Copyright © 2027 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Förderung

  • PT. Aimtopindo Nuansa Kimia

Zitieren

APA

Rikin, M. S., Adhi, T. P., Samadhi, T. W., & Sasongko, S. Y. (2027). Catalytic Valorisation of Water Hyacinth Cellulose through Biomimetic Hydrolysis: Integrating Structural Accessibility and Cooperative Acid Catalysis for Renewable Glucose Production. Bulletin of Chemical Reaction Engineering & Catalysis, 22(1), 134-147. https://doi.org/10.9767/bcrec.20885

Vancouver

Rikin MS, Adhi TP, Samadhi TW, Sasongko SY. Catalytic Valorisation of Water Hyacinth Cellulose through Biomimetic Hydrolysis: Integrating Structural Accessibility and Cooperative Acid Catalysis for Renewable Glucose Production. Bulletin of Chemical Reaction Engineering & Catalysis. 2027;22(1):134-147. doi:10.9767/bcrec.20885

BibTeX
@article{Rikin2027,
  author = {Rikin, Mey Shelly and Adhi, Tri Partono and Samadhi, Tjokorde Walmiki and Sasongko, Setyo Yanus},
  title = {Catalytic Valorisation of Water Hyacinth Cellulose through Biomimetic Hydrolysis: Integrating Structural Accessibility and Cooperative Acid Catalysis for Renewable Glucose Production},
  journal = {Bulletin of Chemical Reaction Engineering & Catalysis},
  year = {2027},
  volume = {22},
  number = {1},
  pages = {134--147},
  doi = {10.9767/bcrec.20885}
}
Kostenlos starten →