Biofuel Conversion from Waste Cooking Oil Using Ni-Cu Catalysts Supported on Mesoporous Silica Synthesized via Acidic CTAB-P123 Templating
Bulletin of Chemical Reaction Engineering & Catalysis · 30.04.2027 · 22 (1) · 42-54
DOI: 10.9767/bcrec.20842 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bulletin of Chemical Reaction Engineering & Catalysis, online erschienen am 30.04.2027. Verfasst von Ahmad Suseno und 2 weiteren Autor:innen. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0). Gefördert von: Diponegoro University.
Abstract (Originalsprache)
This study investigated the effect of acidic synthesis pH (pH of 1, 3, and 6) on the preparation of mesoporous silica supports for Ni-Cu catalysts used in the hydrocracking of waste cooking oil (WCO) into biofuel. The silica supports were synthesized using a reflux method with CTAB and Pluronic P123 as dual templates, followed by impregnation with 5% Ni-Cu metals at a molar ratio of 3:1. Gas sorption analysis (GSA) revealed that the catalyst synthesized at pH of 6 (K-6) exhibited the highest specific surface area (413.44 m²/g) and apparent gravimetric ammonia uptake (7.63 mmol/g). X-ray diffraction (XRD) analysis confirmed the amorphous structure of the silica support and the presence of metallic Ni and Cu phases, while Fourier-transform infrared (FTIR) spectroscopy identified characteristic surface hydroxyl and Si-O-Si vibrational bands. Hydrocracking was conducted at a catalyst temperature of 450 °C and a feed vaporization temperature of 500 °C, using a catalyst-to-feed mass ratio of 1:100. Product composition was evaluated using gas chromatography–mass spectrometry (GC-MS). All three catalysts achieved 100% total conversion, with K-6 exhibiting the highest selectivity toward the biofuel fraction (78.99%). These findings highlight the potential of pH-controlled Ni-Cu/mesoporous silica catalysts for biofuel production from WCO and demonstrate the relationship between catalyst textural properties and biofuel selectivity under the investigated reaction conditions. Copyright © 2027 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Förderung
- Diponegoro University
Zitieren
APA
Suseno, A., Sholika, K. N., & Astuti, Y. (2027). Biofuel Conversion from Waste Cooking Oil Using Ni-Cu Catalysts Supported on Mesoporous Silica Synthesized via Acidic CTAB-P123 Templating. Bulletin of Chemical Reaction Engineering & Catalysis, 22(1), 42-54. https://doi.org/10.9767/bcrec.20842
Vancouver
Suseno A, Sholika KN, Astuti Y. Biofuel Conversion from Waste Cooking Oil Using Ni-Cu Catalysts Supported on Mesoporous Silica Synthesized via Acidic CTAB-P123 Templating. Bulletin of Chemical Reaction Engineering & Catalysis. 2027;22(1):42-54. doi:10.9767/bcrec.20842
BibTeX
@article{Suseno2027,
author = {Suseno, Ahmad and Sholika, Kumala Nadiah and Astuti, Yayuk},
title = {Biofuel Conversion from Waste Cooking Oil Using Ni-Cu Catalysts Supported on Mesoporous Silica Synthesized via Acidic CTAB-P123 Templating},
journal = {Bulletin of Chemical Reaction Engineering & Catalysis},
year = {2027},
volume = {22},
number = {1},
pages = {42--54},
doi = {10.9767/bcrec.20842}
}
EUVIMED