The Effect of Sintering Temperature on the Structural Characteristics, Particle Size, and Photocatalytic Properties of BaTiO3 and Ba0.97Sr0.03TiO3 Nanomaterials
Bulletin of Chemical Reaction Engineering & Catalysis · 30.04.2027 · 22 (1) · 13-24
DOI: 10.9767/bcrec.20841 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bulletin of Chemical Reaction Engineering & Catalysis, online erschienen am 30.04.2027. Verfasst von Elvinda Bendra Agustina und 4 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0). Gefördert von: Ministry of Education, Culture, Research, and Technology, Republic of Indonesia.
Abstract (Originalsprache)
BaTiO3 and Ba0.97Sr0.03TiO3 nanomaterials were synthesized by the co-precipitation method and sintered at 900 °C and 1000 °C for 4 hours. This study investigates the effect of 3 mol% Sr substitution and sintering temperature on the crystal structure, functional groups, particle-size distribution, and photocatalytic performance toward methylene blue (MB) degradation. X-ray diffraction (XRD) showed tetragonal perovskite BaTiO3 with weak secondary reflections, more numerous in the Sr-containing samples, and no resolved shift of the (101) reflection after Sr substitution. The crystallite size estimated from XRD was 30-33 nm (Scherrer plot) and 37-46 nm (unsplit (111) reflection), whereas dynamic light scattering (DLS) gave Z-average hydrodynamic diameters of about 250-440 nm, indicating agglomeration of the crystallites; the Sr-containing powder was smaller only at 900 °C. FTIR spectra showed the characteristic Ti-O (Ba-Ti-O) stretching band at 565-576 cm-1. Photocatalytic activity was evaluated using 10 ppm MB solution under UV irradiation. The apparent MB removal, calculated from the absorbance at 664 nm, was ≈34% and ≈24% for Ba0.97Sr0.03TiO3 sintered at 900 °C and 1000 °C, compared with ≈28% and ≈0% for undoped BaTiO3; thus Sr substitution increased, and the higher sintering temperature decreased, the apparent removal. The origin of this behavior was not directly characterized and requires further study. Copyright © 2027 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).
Förderung
- Ministry of Education, Culture, Research, and Technology, Republic of Indonesia
Zitieren
APA
Agustina, E. B., Yuniarto, A. H. P., Dewi, A. T., Iriani, Y., & Andini, T. (2027). The Effect of Sintering Temperature on the Structural Characteristics, Particle Size, and Photocatalytic Properties of BaTiO3 and Ba0.97Sr0.03TiO3 Nanomaterials. Bulletin of Chemical Reaction Engineering & Catalysis, 22(1), 13-24. https://doi.org/10.9767/bcrec.20841
Vancouver
Agustina EB, Yuniarto AHP, Dewi AT, Iriani Y, Andini T. The Effect of Sintering Temperature on the Structural Characteristics, Particle Size, and Photocatalytic Properties of BaTiO3 and Ba0.97Sr0.03TiO3 Nanomaterials. Bulletin of Chemical Reaction Engineering & Catalysis. 2027;22(1):13-24. doi:10.9767/bcrec.20841
BibTeX
@article{Agustina2027,
author = {Agustina, Elvinda Bendra and Yuniarto, Abdul Hakim Prima and Dewi, Alif Tiana and Iriani, Yofentina and Andini, Trya},
title = {The Effect of Sintering Temperature on the Structural Characteristics, Particle Size, and Photocatalytic Properties of BaTiO3 and Ba0.97Sr0.03TiO3 Nanomaterials},
journal = {Bulletin of Chemical Reaction Engineering & Catalysis},
year = {2027},
volume = {22},
number = {1},
pages = {13--24},
doi = {10.9767/bcrec.20841}
}
EUVIMED