EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Effect of Sodium Borohydride to Ferric Chloride Molar Ratios on Nanoscale Zero-Valent Iron for Hydrogen Generation from Formic Acid

Siti Aishah Yusuf, Meor Saiful Rizal Meor Ahmad Zubairi, Siti Fatimah Abdul Halim, Siu Hua Chang

Bulletin of Chemical Reaction Engineering & Catalysis · 30.08.2026 · 21 (2) · 482-489

DOI: 10.9767/bcrec.20634 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bulletin of Chemical Reaction Engineering & Catalysis, online erschienen am 30.08.2026. Verfasst von Siti Aishah Yusuf und 3 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0). Gefördert von: Ministry of Higher Education (MOHE), Malaysia.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogen generation from formic acid using nanoscale zero-valent iron (nZVI) represents a promising route for low-cost and sustainable hydrogen production. However, the effect of sodium borohydride (NaBH₄) to ferric chloride (FeCl₃) molar ratio on nZVI synthesis and performance remains insufficiently explored. This study investigated how varying NaBH₄:FeCl₃ molar ratios affect nZVI synthesis characteristics and its hydrogen generation efficiency from formic acid, which acts as a safe and easily handled hydrogen carrier. nZVI was synthesized through a one-step liquid-phase chemical reduction method using NaBH₄:FeCl₃ ratios ranging from 4.4:1 to 8.8:1. UV–Vis spectroscopy indicated that the 4.4:1 ratio yielded the highest nZVI formation, reflecting optimal reduction efficiency and particle formation. Hydrogen generation experiments conducted in a closed reactor equipped with a water displacement system revealed that nZVI synthesized at the 4.4:1 ratio achieved the maximum hydrogen volume (98 mL), which progressively declined to 53 mL at the 8.8:1 ratio. These findings demonstrate that precursor molar ratios significantly influence nZVI formation, stability, and reactivity toward hydrogen evolution. An optimal NaBH₄:FeCl₃ ratio of 4.4:1 was identified for maximizing nZVI formation and hydrogen volume, providing valuable insights for developing scalable formic acid–based hydrogen generation systems. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Förderung

  • Ministry of Higher Education (MOHE), Malaysia

Zitieren

APA

Yusuf, S. A., Zubairi, M. S. R. M. A., Halim, S. F. A., & Chang, S. H. (2026). Effect of Sodium Borohydride to Ferric Chloride Molar Ratios on Nanoscale Zero-Valent Iron for Hydrogen Generation from Formic Acid. Bulletin of Chemical Reaction Engineering & Catalysis, 21(2), 482-489. https://doi.org/10.9767/bcrec.20634

Vancouver

Yusuf SA, Zubairi MSRMA, Halim SFA, Chang SH. Effect of Sodium Borohydride to Ferric Chloride Molar Ratios on Nanoscale Zero-Valent Iron for Hydrogen Generation from Formic Acid. Bulletin of Chemical Reaction Engineering & Catalysis. 2026;21(2):482-489. doi:10.9767/bcrec.20634

BibTeX
@article{Yusuf2026,
  author = {Yusuf, Siti Aishah and Zubairi, Meor Saiful Rizal Meor Ahmad and Halim, Siti Fatimah Abdul and Chang, Siu Hua},
  title = {Effect of Sodium Borohydride to Ferric Chloride Molar Ratios on Nanoscale Zero-Valent Iron for Hydrogen Generation from Formic Acid},
  journal = {Bulletin of Chemical Reaction Engineering & Catalysis},
  year = {2026},
  volume = {21},
  number = {2},
  pages = {482--489},
  doi = {10.9767/bcrec.20634}
}
Kostenlos starten →