EUVIMEDEUVIMED entdecken
Open Access · CC BY-SA 4.0

Tailoring Photocatalytic Activity of Sol-Gel-Derived Bismuth Oxide via Calcination Time Optimization for Methyl Orange Degradation

Yayuk Astuti, Agus Muslim, Adi Darmawan

Bulletin of Chemical Reaction Engineering & Catalysis · 30.04.2026 · 21 (1) · 11-21

DOI: 10.9767/bcrec.20452 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Bulletin of Chemical Reaction Engineering & Catalysis, online erschienen am 30.04.2026. Verfasst von Yayuk Astuti und 2 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-SA 4.0). Gefördert von: Universitas Diponegoro.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bismuth oxide (Bi2O3) is a yellow solid, has good electrical properties and a wide band gap energy (2-3.96 eV). Therefore, this material is commonly used as a photocatalyst. This study aims to synthesize bismuth oxide using the sol-gel method, determine its physicochemical characteristics and photocatalytic activity in the degradation of methyl orange dyes. Bi2O3 is synthesized from Bi(NO3)3.5H2O which is reacted with citric acid at 100 ° C for 20 hours. The formed gel is then dried and calcined at 600 °C for 1, 2, 3, 4 and 5 hours. The synthesis results in the form of pale-yellow powder with the same crystal system that is a mixture of α-Bi2O3 (monoclinic) and γ-Bi2O3 (BCC) and has almost the same morphology that is similar to coral and has a particle size of 1-8 μm. The results of photocatalytic activity tests showed that the constant rate of degradation reaction of methyl orange by bismuth oxide with calcination time of 1, 2, 3, 4, and 5 hours respectively was 2.76×10-5 s-1, 2.65×10-5 s-1, 2.53×10-5 s-1, 2.81×10-5 s-1 and 3.87×10-5 s-1. Bismuth oxide with a calcination time of 5 hours has the highest photocatalytic activity. Meanwhile, bismuth oxide with a calcination time of 5 hours has a band-gap of 2.86 eV and 2.64 eV. The stages of decomposition of bismuth oxide material with a calcination time of 5 hours consisted of 3 release stages namely H2O, CO2, CxHyOz respectively 12.20%, 5.33% 30.54%. Copyright © 2026 by Authors, Published by BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Förderung

  • Universitas Diponegoro

Zitieren

APA

Astuti, Y., Muslim, A., & Darmawan, A. (2026). Tailoring Photocatalytic Activity of Sol-Gel-Derived Bismuth Oxide via Calcination Time Optimization for Methyl Orange Degradation. Bulletin of Chemical Reaction Engineering & Catalysis, 21(1), 11-21. https://doi.org/10.9767/bcrec.20452

Vancouver

Astuti Y, Muslim A, Darmawan A. Tailoring Photocatalytic Activity of Sol-Gel-Derived Bismuth Oxide via Calcination Time Optimization for Methyl Orange Degradation. Bulletin of Chemical Reaction Engineering & Catalysis. 2026;21(1):11-21. doi:10.9767/bcrec.20452

BibTeX
@article{Astuti2026,
  author = {Astuti, Yayuk and Muslim, Agus and Darmawan, Adi},
  title = {Tailoring Photocatalytic Activity of Sol-Gel-Derived Bismuth Oxide via Calcination Time Optimization for Methyl Orange Degradation},
  journal = {Bulletin of Chemical Reaction Engineering & Catalysis},
  year = {2026},
  volume = {21},
  number = {1},
  pages = {11--21},
  doi = {10.9767/bcrec.20452}
}
Kostenlos starten →