EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimasi Desain Trailing Edge Splitter untuk Mengurangi Turbulensi dan Pressure Drop pada Exhaust Silencer Turbin Gas Menggunakan Metode CFD dan Bayesian Optimization

Ibrahim Basalamah, Ahmad Atif Fikri, Willyanto Anggono, Dani Harmanto

Jurnal Teknik Mesin · 29.10.2026 · 23 (2) · 102-113

DOI: 10.9744/jtm.23.2.102-113 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknik Mesin, online erschienen am 29.10.2026. Verfasst von Ibrahim Basalamah und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Gas turbines are widely used in modern power generation due to their high efficiency and flexibility. However, using exhaust silencers in exhaust gas systems can increase back pressure, reducing overall turbine performance. The aerodynamic behavior of the splitter inside the exhaust silencer, especially at the trailing edge, significantly affects pressure drop and turbulence intensity. This study aims to optimize the trailing edge geometry of a GE Frame 6FA exhaust silencer splitter using a combination of computational fluid dynamics (CFD) and Bayesian optimization (BO). CFD simulations were conducted in ANSYS Fluent using a poly-hexcore mesh, while the optimization employed a Gaussian process (GP) surrogate model with an expected improvement (EI) acquisition function. Seven trailing edge angles (5°–20°) were evaluated to observe the aerodynamic trade-off between pressure drop and turbulent kinetic energy (TKE). The optimal configuration was found at 13.9°, yielding a TKE of 0.43 J/kg and a pressure drop of 18.38 Pa, well below the industrial allowable pressure drop limit of 34 Pa. The results confirm that the BO-GP framework effectively reduces computational cost while achieving a more aerodynamically balanced silencer design.

Zitieren

APA

Basalamah, I., Fikri, A. A., Anggono, W., & Harmanto, D. (2026). Optimasi Desain Trailing Edge Splitter untuk Mengurangi Turbulensi dan Pressure Drop pada Exhaust Silencer Turbin Gas Menggunakan Metode CFD dan Bayesian Optimization. Jurnal Teknik Mesin, 23(2), 102-113. https://doi.org/10.9744/jtm.23.2.102-113

Vancouver

Basalamah I, Fikri AA, Anggono W, Harmanto D. Optimasi Desain Trailing Edge Splitter untuk Mengurangi Turbulensi dan Pressure Drop pada Exhaust Silencer Turbin Gas Menggunakan Metode CFD dan Bayesian Optimization. Jurnal Teknik Mesin. 2026;23(2):102-113. doi:10.9744/jtm.23.2.102-113

BibTeX
@article{Basalamah2026,
  author = {Basalamah, Ibrahim and Fikri, Ahmad Atif and Anggono, Willyanto and Harmanto, Dani},
  title = {Optimasi Desain Trailing Edge Splitter untuk Mengurangi Turbulensi dan Pressure Drop pada Exhaust Silencer Turbin Gas Menggunakan Metode CFD dan Bayesian Optimization},
  journal = {Jurnal Teknik Mesin},
  year = {2026},
  volume = {23},
  number = {2},
  pages = {102--113},
  doi = {10.9744/jtm.23.2.102-113}
}
Kostenlos starten →