EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Nmax Gen 2 Brake Cooling Through CFD-Based Duct Profile Optimization

Teng Sutrisno, Marcell Chevilino, Ninuk Jonoadji, Ian Hardianto Siahaan, Amelia Sugondo, Willyanto Anggono, Roche Alimin, Melvin E. Simanjuntak, Micheal Suryajaya

Jurnal Teknik Mesin · 22.04.2026 · 23 (1) · 27-34

DOI: 10.9744/jtm.23.1.27-34 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Jurnal Teknik Mesin, online erschienen am 22.04.2026. Verfasst von Teng Sutrisno und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Efforts to improve the performance of motorcycle brake system performance are essential for enhancing riding safety, particularly at high speeds. The main objective of this study is to evaluate the effect of a brake duct on brake disc cooling using computational fluid dynamics (CFD). This study also aims to determine the optimal brake duct design for motorcycles applications. To assess the accuracy of the numerical simulations, wind tunnel experiments were conducted to quantify the error between the simulation and experimental results. The validation results showed that the simulation error was 5.64%, indicating good agreement with the experimental data. The simulation was performed by modelling the motorcycle braking system and brake duct, then analyzed using ANSYS Fluent. To identify the optimal brake duct configuration, variations in the inner radius R, duct length L, and diffuser size D were evaluated. The best configuration was defined as the design that produced the lowest pressure loss and the highest ΔP statis. The simulation results indicate that the optimal configuration corresponds to R = 20 mm, L = 180 mm, and D = 8.75mmx 10mm.

Zitieren

APA

Sutrisno, T., Chevilino, M., Jonoadji, N., Siahaan, I. H., Sugondo, A., Anggono, W., Alimin, R., Simanjuntak, M. E., & Suryajaya, M. (2026). Enhancing Nmax Gen 2 Brake Cooling Through CFD-Based Duct Profile Optimization. Jurnal Teknik Mesin, 23(1), 27-34. https://doi.org/10.9744/jtm.23.1.27-34

Vancouver

Sutrisno T, Chevilino M, Jonoadji N, Siahaan IH, Sugondo A, Anggono W, et al. Enhancing Nmax Gen 2 Brake Cooling Through CFD-Based Duct Profile Optimization. Jurnal Teknik Mesin. 2026;23(1):27-34. doi:10.9744/jtm.23.1.27-34

BibTeX
@article{Sutrisno2026,
  author = {Sutrisno, Teng and Chevilino, Marcell and Jonoadji, Ninuk and Siahaan, Ian Hardianto and Sugondo, Amelia and Anggono, Willyanto and Alimin, Roche and Simanjuntak, Melvin E. and Suryajaya, Micheal},
  title = {Enhancing Nmax Gen 2 Brake Cooling Through CFD-Based Duct Profile Optimization},
  journal = {Jurnal Teknik Mesin},
  year = {2026},
  volume = {23},
  number = {1},
  pages = {27--34},
  doi = {10.9744/jtm.23.1.27-34}
}
Kostenlos starten →