EUVIMEDEUVIMED entdecken
Crossref

Magnification Factor in Partial Capacity Design for Multitude Bay Buildings

Andrians Juniawan

Advances in Civil Engineering and Sustainable Architecture · 2019

DOI: 10.9744/acesa.v2i1.8539 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Civil Engineering and Sustainable Architecture, 2019. Verfasst von Andrians Juniawan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Partial capacity design (PCD) is an alternative method to design earthquake-resistant structures. PCD leads to a partial side sway mechanism as its collapse mechanism. Therefore, a magnification factor is applied in designing elastic column (usually perimeter column) in order to make it stronger than the plastic columns. The purpose of this research is to try a proposed magnification factor for buildings with long span. Two concrete buildings located in Surabaya at soft soil, consists of 6- and 10-story, were studied. Each building has 9 spans in the x- and y-directions, each 8 meters in length. The buildings were designed with the same columns dimension. The elastic columns were located in the building perimeter. The buildings were evaluated using non-linear time history analysis which shows that partial side sway mechanism was achieved.

Zitieren

APA

Juniawan, A. (2019). Magnification Factor in Partial Capacity Design for Multitude Bay Buildings. Advances in Civil Engineering and Sustainable Architecture. https://doi.org/10.9744/acesa.v2i1.8539

Vancouver

Juniawan A. Magnification Factor in Partial Capacity Design for Multitude Bay Buildings. Advances in Civil Engineering and Sustainable Architecture. 2019. doi:10.9744/acesa.v2i1.8539

BibTeX
@article{Juniawan2019,
  author = {Juniawan, Andrians},
  title = {Magnification Factor in Partial Capacity Design for Multitude Bay Buildings},
  journal = {Advances in Civil Engineering and Sustainable Architecture},
  year = {2019},
  doi = {10.9744/acesa.v2i1.8539}
}
Kostenlos starten →