EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lateral Soil Movement Due to Installation of a Single Pile using Jack-in Method

Dewi Hindra Wijaya

Advances in Civil Engineering and Sustainable Architecture · 2024

DOI: 10.9744/acesa.v1i2.8537 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Civil Engineering and Sustainable Architecture, 2024. Verfasst von Dewi Hindra Wijaya. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lateral movement of soil due to the installation of a single pile using jack-in method was studied. The piles considered in this study were 15 piles of the diameter 800 mm. The lateral soil movement was predicted using Plaxis 2D, which incorporated cavity expansion theory as prescribed displacement. The results were compared to the recorded data from the field and those determined using several formulas. The comparison shows that the lateral movement of soil due to the installation of a single pile can be closely estimated using Plaxis 2D that employed a linear prescribed displacement of 0.42r at the pile head and zero at the pile tip. Lateral displacement of soil predicted using Plaxis 2D agrees well with data measured from the field both at the ground surface and along the depth of piles.

Zitieren

APA

Wijaya, D. H. (2024). Lateral Soil Movement Due to Installation of a Single Pile using Jack-in Method. Advances in Civil Engineering and Sustainable Architecture. https://doi.org/10.9744/acesa.v1i2.8537

Vancouver

Wijaya DH. Lateral Soil Movement Due to Installation of a Single Pile using Jack-in Method. Advances in Civil Engineering and Sustainable Architecture. 2024. doi:10.9744/acesa.v1i2.8537

BibTeX
@article{Wijaya2024,
  author = {Wijaya, Dewi Hindra},
  title = {Lateral Soil Movement Due to Installation of a Single Pile using Jack-in Method},
  journal = {Advances in Civil Engineering and Sustainable Architecture},
  year = {2024},
  doi = {10.9744/acesa.v1i2.8537}
}
Kostenlos starten →