EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

AI-Enabled Wire-Arc Additive Manufacturing of TiB2-Modified Recycled AA7075 for Crack-Resistant Aerospace Structure

SANKAR THANGAVEL, Divya Ponnusamy, Kannan Thanneerpanthalpalayam Kandasamy, J Mahendran

Journal of Thermal and Sustainable Energy Systems · 23.09.2026 · 1 (1)

DOI: 10.83818/x4p1dj21 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Thermal and Sustainable Energy Systems, online erschienen am 23.09.2026. Verfasst von SANKAR THANGAVEL und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The high-strength AA7075 aluminum alloy is attractive for aerospace and defense structures because of its favorable strength-to-weight ratio; however, its susceptibility to solidification cracking restricts its processing through wire-arc additive manufacturing. Simultaneously, the growing quantity of high-grade aluminum machining waste creates a need for direct and value-added recycling. This study developed a crack-resistant recycled AA7075 feedstock modified with in-situ TiB2 grain refiners for wire-arc additive manufacturing of lightweight strategic components. Clean AA7075 machining chips were remelted, compositionally corrected, and converted into welding wires containing controlled TiB2 additions. Wall structures were deposited by varying the wire-feed rate, travel speed, current, interpass temperature, and TiB- concentration. High-speed thermal imaging, arc-voltage signals, and acoustic emission data were recorded during deposition. A physics-informed machine-learning framework combining thermal-history constraints with XGBoost and Gaussian-process regression was used to predict the porosity, hot crack density, grain size, and mechanical anisotropy. The deposited structures were examined using X-ray computed tomography, optical microscopy, scanning electron microscopy, electron backscatter diffraction, and X-ray diffraction. Tensile, hardness, fracture toughness, and fatigue tests is performed to determine the relationship between process stability, TiB--induced heterogeneous nucleation, and structural performance. The life-cycle energy consumption and material recovery were also compared with those of conventionally produced AA7075. The principal novelty is the integration of recycled aerospace-grade aluminum, nanoparticle-assisted grain refinement, multimodal in situ sensing, and physically constrained defect prediction in a single additive-manufacturing framework. This study is expected to establish a closed-loop route for transforming aluminum waste into qualified, geometrically complex components while reducing hot cracking, process uncertainty, and dependence on primary aluminum.

Zitieren

APA

THANGAVEL, S., Ponnusamy, D., Kandasamy, K. T., & Mahendran, J. (2026). AI-Enabled Wire-Arc Additive Manufacturing of TiB2-Modified Recycled AA7075 for Crack-Resistant Aerospace Structure. Journal of Thermal and Sustainable Energy Systems, 1(1). https://doi.org/10.83818/x4p1dj21

Vancouver

THANGAVEL S, Ponnusamy D, Kandasamy KT, Mahendran J. AI-Enabled Wire-Arc Additive Manufacturing of TiB2-Modified Recycled AA7075 for Crack-Resistant Aerospace Structure. Journal of Thermal and Sustainable Energy Systems. 2026;1(1). doi:10.83818/x4p1dj21

BibTeX
@article{THANGAVEL2026,
  author = {THANGAVEL, SANKAR and Ponnusamy, Divya and Kandasamy, Kannan Thanneerpanthalpalayam and Mahendran, J},
  title = {AI-Enabled Wire-Arc Additive Manufacturing of TiB2-Modified Recycled AA7075 for Crack-Resistant Aerospace Structure},
  journal = {Journal of Thermal and Sustainable Energy Systems},
  year = {2026},
  volume = {1},
  number = {1},
  doi = {10.83818/x4p1dj21}
}
Kostenlos starten →