Self-Sensing AlCrFeNiSi/Ti₃AlC₂ Nanolaminates Enable Innovative Temperature-Compensated Monitoring of Molten-Chloride Damage
Journal of Thermal and Sustainable Energy Systems · 23.09.2026 · 1 (1)
DOI: 10.83818/f0ddm841 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Thermal and Sustainable Energy Systems, online erschienen am 23.09.2026. Verfasst von Sathish Kumar Manickam und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Molten chloride salts support high-temperature heat transfer and thermal-energy storage, but aggressive dissolution and unstable protective scales restrict structural-alloy durability. Multifunctional coatings integrating corrosion resistance with damage detection are therefore required for reliable molten-salt components. Existing inorganic coatings do not provide depth-resolved, temperature-compensated electrical warning before substrate breakthrough. This investigation establishes an innovative AlCrFeNiSi/Ti₃AlC₂ nanolaminate that combines chloride protection with embedded MAX-phase damage sentinels. Three modulation-period architectures were evaluated using composition-derived descriptors, geometrical calculations, four-terminal resistance sensing, temperature correction, electrochemical impedance spectroscopy, dissolved-metal monitoring, and event-triggered microscopy. A 3.50 µm coating containing 0.50 µm Ti₃AlC₂ produced a 14.29% full-coating MAX fraction. Interface density decreased from 13.33 to 3.33 µm⁻¹ across the L150–L600 architectures while phase proportions remained constant, isolating modulation-period effects. Changing H21S8 to H21S5 increased the Al/Si ratio by 60%, whereas configurational entropy decreased by only 2.6%. Idealized conductive-area loss doubled normalized resistance at 50% remaining area and increased it tenfold at 10%, demonstrating nonlinear damage sensitivity. The architecture provides a quantitative platform for separating thermal, chemical, and mechanical resistance changes. It supports condition-based monitoring of thermal-storage and reactor components exposed to chloride melts. Future research validates warning lead, interfacial stability, and sensor durability through long-duration exposures and depth-correlated microscopy.
Zitieren
APA
Manickam, S. K., Dhevarajan, V., Subramanian, V., & Alagesan, P. (2026). Self-Sensing AlCrFeNiSi/Ti₃AlC₂ Nanolaminates Enable Innovative Temperature-Compensated Monitoring of Molten-Chloride Damage. Journal of Thermal and Sustainable Energy Systems, 1(1). https://doi.org/10.83818/f0ddm841
Vancouver
Manickam SK, Dhevarajan V, Subramanian V, Alagesan P. Self-Sensing AlCrFeNiSi/Ti₃AlC₂ Nanolaminates Enable Innovative Temperature-Compensated Monitoring of Molten-Chloride Damage. Journal of Thermal and Sustainable Energy Systems. 2026;1(1). doi:10.83818/f0ddm841
BibTeX
@article{Manickam2026,
author = {Manickam, Sathish Kumar and Dhevarajan, Vasudhevan and Subramanian, Vijaya and Alagesan, Parthiban},
title = {Self-Sensing AlCrFeNiSi/Ti₃AlC₂ Nanolaminates Enable Innovative Temperature-Compensated Monitoring of Molten-Chloride Damage},
journal = {Journal of Thermal and Sustainable Energy Systems},
year = {2026},
volume = {1},
number = {1},
doi = {10.83818/f0ddm841}
}
EUVIMED