EUVIMEDEUVIMED entdecken
Crossref

DETERMINATION OF INCUBATION CHARACTERISTICS OF THE HIGH RATE PLASTIC DEFORMATION PROCESS OF MATERIALS DURING IMPACT TESTS OF A CYLINDRICAL SAMPLE ON A RIGID ANVIL

R. V. Lukashov, G. A. Volkov, E. S. Ostropiko, A. A. Gruzdkov, Yu. V. Petrov

Известия Российской академии наук. Механика твердого тела / Mechanics of Solids · 2025 · (6) · 244

DOI: 10.7868/s3034642825060133 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Известия Российской академии наук. Механика твердого тела / Mechanics of Solids, 2025. Verfasst von R. V. Lukashov und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A fundamentally new method is proposed for assessing the plastic response of a material to dynamic loading during tests of cylindrical specimens impacted against a rigid barrier. Unlike the traditional Taylor test, this study considers a temporal yield criterion based on the concept of incubation time. This approach allows for a transition from averaged rate-based estimates to a more accurate and physically grounded description of material behavior over time. Impact tests of cylindrical specimens against a rigid anvil were conducted to determine the yield strength exhibited by the material at various impact velocities. The material behavior under high rate elastoplastic deformation was investigated. The impact-on-anvil test incorporates new dynamic characteristics of the material, which define the rate sensitivity of the yield strength based on the incubation time criterion. The test results are interpreted as a time-dependent yield strength, i.e., the threshold amplitude of the impact load as a function of its duration. It is shown how the parameters that enable prediction of the rate and temporal dependence of the yield strength under arbitrary impact-wave loading can be estimated from a single test.

Zitieren

APA

Lukashov, R. V., Volkov, G. A., Ostropiko, E. S., Gruzdkov, A. A., & Petrov, Y. V. (2025). DETERMINATION OF INCUBATION CHARACTERISTICS OF THE HIGH RATE PLASTIC DEFORMATION PROCESS OF MATERIALS DURING IMPACT TESTS OF A CYLINDRICAL SAMPLE ON A RIGID ANVIL. Известия Российской академии наук. Механика твердого тела / Mechanics of Solids, 244. https://doi.org/10.7868/s3034642825060133

Vancouver

Lukashov RV, Volkov GA, Ostropiko ES, Gruzdkov AA, Petrov YV. DETERMINATION OF INCUBATION CHARACTERISTICS OF THE HIGH RATE PLASTIC DEFORMATION PROCESS OF MATERIALS DURING IMPACT TESTS OF A CYLINDRICAL SAMPLE ON A RIGID ANVIL. Известия Российской академии наук. Механика твердого тела / Mechanics of Solids. 2025:244. doi:10.7868/s3034642825060133

BibTeX
@article{Lukashov2025,
  author = {Lukashov, R. V. and Volkov, G. A. and Ostropiko, E. S. and Gruzdkov, A. A. and Petrov, Yu. V.},
  title = {DETERMINATION OF INCUBATION CHARACTERISTICS OF THE HIGH RATE PLASTIC DEFORMATION PROCESS OF MATERIALS DURING IMPACT TESTS OF A CYLINDRICAL SAMPLE ON A RIGID ANVIL},
  journal = {Известия Российской академии наук. Механика твердого тела / Mechanics of Solids},
  year = {2025},
  number = {6},
  pages = {244},
  doi = {10.7868/s3034642825060133}
}
Kostenlos starten →