EUVIMEDEUVIMED entdecken
Crossref

Regularities of Crystallographic Texture Formation in Austenitic Steel during Rolling and Tensile Testing

O.A. Krymskaya, M.G. Isaenkova, A.V. Osintsev, V.A. Fesenko, V.P. Tyutin, D.A. Bednyakov

Поверхность. Рентгеновские, синхротронные и нейтронные исследования / Journal of Surface Investigation. X-Ray, Synchrotron and Neutron Techniques · 2025 · (5) · 73

DOI: 10.7868/s3034573125050091 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Поверхность. Рентгеновские, синхротронные и нейтронные исследования / Journal of Surface Investigation. X-Ray, Synchrotron and Neutron Techniques, 2025. Verfasst von O.A. Krymskaya und 5 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

AISI304 steel samples cut from a forged rod were rolled at room temperature using longitudinal and cross schemes, after which they were subjected to various heat treatments with cooling from temperatures of the two-phase α+γ- and single-phase γ-regions to fix different phase compositions. The phase composition was studied, the volume fractions of austenite and α-martensite, crystallographic texture, structure and substructure of two-phase steel were determined, uniaxial tension tests of rolled sheets in different directions were carried out to evaluate the anisotropy of mechanical properties. It was found that the occurrence of γ → α phase transformations during deformation significantly depended on the rolling scheme and conditions, and the amount of remaining austenite varied within 15–29%. The reverse α → γ phase transformation initiated by annealing in the single-phase γ-region leads in the case of longitudinal rolling to the multiplication of the γ-phase texture components and the appearance of an additional orientation {113}, while in the cross scheme the texture of deformed austenite is preserved. Quenching in the two-phase region at 700°C does not lead to a fundamental change in the austenite texture, but ensures the appearance of additional martensite components {110} and {112}. The texture features affect the anisotropy of elastic properties and yield strengths: the anisotropy of the Young's modulus of samples consisting entirely of austenite is higher (E_TD/E_RD = 1.67) compared to 1.25 for samples of quenched two-phase steel.

Zitieren

APA

Krymskaya, O., Isaenkova, M., Osintsev, A., Fesenko, V., Tyutin, V., & Bednyakov, D. (2025). Regularities of Crystallographic Texture Formation in Austenitic Steel during Rolling and Tensile Testing. Поверхность. Рентгеновские, синхротронные и нейтронные исследования / Journal of Surface Investigation. X-Ray, Synchrotron and Neutron Techniques, 73. https://doi.org/10.7868/s3034573125050091

Vancouver

Krymskaya O, Isaenkova M, Osintsev A, Fesenko V, Tyutin V, Bednyakov D. Regularities of Crystallographic Texture Formation in Austenitic Steel during Rolling and Tensile Testing. Поверхность. Рентгеновские, синхротронные и нейтронные исследования / Journal of Surface Investigation. X-Ray, Synchrotron and Neutron Techniques. 2025:73. doi:10.7868/s3034573125050091

BibTeX
@article{Krymskaya2025,
  author = {Krymskaya, O.A. and Isaenkova, M.G. and Osintsev, A.V. and Fesenko, V.A. and Tyutin, V.P. and Bednyakov, D.A.},
  title = {Regularities of Crystallographic Texture Formation in Austenitic Steel during Rolling and Tensile Testing},
  journal = {Поверхность. Рентгеновские, синхротронные и нейтронные исследования / Journal of Surface Investigation. X-Ray, Synchrotron and Neutron Techniques},
  year = {2025},
  number = {5},
  pages = {73},
  doi = {10.7868/s3034573125050091}
}
Kostenlos starten →