The influence of the variability of the support of the mortar base plate on the quality of the results obtained in the process of its numerical design
Advances in Mechanical and Materials Engineering · 2024
DOI: 10.7862/rm.2024.10 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Mechanical and Materials Engineering, 2024. Verfasst von Piotr Bieniek und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).
Abstract (Originalsprache)
Due to the high costs associated with the purchase of ammunition and firing in certified training ground centers, tests of retaining plate deformations are increasingly replaced by computer simulations using numerical models. Computer programs usually use a single-parameter subsoil model (Winkler-Zimmermann) for calculations, which requires providing the subgrade susceptibility coefficient. The subgrade compliance coefficient is intended to determine the mutual reaction of the subgrade and the structure due to the pressure exerted on the soil by the retaining slab, which settles. When designing slabs in computer programs, it is assumed that the substrate compliance coefficient is constant. Determining the impact of the soil on the retaining slab is important when analyzing its deformations. The subject of the work was the analysis of the influence of ground support on the results obtained during modeling of the retaining slab. In order to obtain data for FEM analysis and validation, the actual strains occurring on the thrust plate were measured using strain gauge rosettes. The plate deformations were measured during field shooting tests. In order to vary the influence of supporting the slab on the ground and obtain reliable stress values on the slab surface, a method of successive iterations was proposed. Calculations are performed using this method until the error is smaller than the assumed one.
Zitieren
APA
Bieniek, P., Tupaj, M., & Szwajka, K. (2024). The influence of the variability of the support of the mortar base plate on the quality of the results obtained in the process of its numerical design. Advances in Mechanical and Materials Engineering. https://doi.org/10.7862/rm.2024.10
Vancouver
Bieniek P, Tupaj M, Szwajka K. The influence of the variability of the support of the mortar base plate on the quality of the results obtained in the process of its numerical design. Advances in Mechanical and Materials Engineering. 2024. doi:10.7862/rm.2024.10
BibTeX
@article{Bieniek2024,
author = {Bieniek, Piotr and Tupaj, Mirosław and Szwajka, Krzysztof},
title = {The influence of the variability of the support of the mortar base plate on the quality of the results obtained in the process of its numerical design},
journal = {Advances in Mechanical and Materials Engineering},
year = {2024},
doi = {10.7862/rm.2024.10}
}
EUVIMED