Robot Contact Control Using Velocity-proportional Virtual Force-based Admittance Control
Journal of the Korean Society for Precision Engineering · 01.11.2026 · 43 (11) · 1195-1202
DOI: 10.7736/jkspe.026.00067 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the Korean Society for Precision Engineering, erschienen am 01.11.2026. Verfasst von Minjae Kim und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 3.0).
Abstract (Originalsprache)
This paper proposes a velocity-proportional virtual force-based admittance control method to suppress desired position accumulation during contact in robot direct teaching. In conventional admittance control, the force that an operator applies to the handle is converted into a torque component about the robot drive axis and then used to generate the desired position. When the end fixture is constrained by contact, however, the desired position can keep moving away from the actual position, thereby increasing the tracking error and motor torque. The proposed method detects this accumulation state on the basis of the motor torque magnitude and the sign consistency between the motor torque and the converted torque component. Upon detection, the converted torque component is replaced with a virtual component of opposite sign that is proportional to the desired velocity, thereby damping the desired velocity and limiting further desired position updates. In contact experiments on the third rotational axis of an ARF module, the conventional method reached 300% of the rated torque and caused a servo driver overload error. In contrast, the proposed method limited the maximum position error to approximately 0.086° and the maximum motor torque to approximately 63% of the rated torque, without an overload error.
Zitieren
APA
Kim, M., Lee, J., Kang, M., Kim, J., Kim, M., & Park, S. H. (2026). Robot Contact Control Using Velocity-proportional Virtual Force-based Admittance Control. Journal of the Korean Society for Precision Engineering, 43(11), 1195-1202. https://doi.org/10.7736/jkspe.026.00067
Vancouver
Kim M, Lee J, Kang M, Kim J, Kim M, Park SH. Robot Contact Control Using Velocity-proportional Virtual Force-based Admittance Control. Journal of the Korean Society for Precision Engineering. 2026;43(11):1195-1202. doi:10.7736/jkspe.026.00067
BibTeX
@article{Kim2026,
author = {Kim, Minjae and Lee, Jaesoon and Kang, Minseok and Kim, Jong-Geol and Kim, Murim and Park, Sang Hyun},
title = {Robot Contact Control Using Velocity-proportional Virtual Force-based Admittance Control},
journal = {Journal of the Korean Society for Precision Engineering},
year = {2026},
volume = {43},
number = {11},
pages = {1195--1202},
doi = {10.7736/jkspe.026.00067}
}
EUVIMED