EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 3.0

Development of Marker-based Machine Tending Technology Robust to Base Position Errors

Hyun Woo Chung, Tae-Keun Kim, Byungjin Jung, Chang Nho Cho, Han Seop Jeong, Myeong Sik Oh, Gi Hwan Kim, GaYeon Kim, Jung-Hoon Hwang

Journal of the Korean Society for Precision Engineering · 01.11.2026 · 43 (11) · 1149-1156

DOI: 10.7736/jkspe.026.00063 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Korean Society for Precision Engineering, erschienen am 01.11.2026. Verfasst von Hyun Woo Chung und 8 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Manipulator-based machine tending is a key automation technology in computer numerical control (CNC) machining, and mobile-base configurations are increasingly adopted to enable flexible reconfiguration in high-mix, low-volume manufacturing environments. However, once the robot base is relocated, the previously taught trajectory is no longer valid, and manual reteaching is required, which is time-consuming, labor-intensive, and highly dependent on operator skill. This paper proposes a marker-based machine tending method that combines multi-marker Perspective-n-Point (PnP) pose estimation with Iterative Closest Point (ICP) registration in a two-step calibration. In the first step, PnP is used to move the robot to the pre-stored reference pose. In the second step, ICP is applied to the point cloud data obtained at the current robot pose and the pre-stored point cloud data to estimate the change in the robot base pose with respect to the CNC machine. Based on this estimate, the robot can resume its task after base relocation. Validation in a CNC lathe machine tending environment showed that, compared with conventional marker-only calibration, the position repeatability measured by a laser tracker improved from 2.658 to 1.795 mm and the machine tending success rate increased from 47% to 93%, confirming the effectiveness of the proposed method.

Zitieren

APA

Chung, H. W., Kim, T., Jung, B., Cho, C. N., Jeong, H. S., Oh, M. S., Kim, G. H., Kim, G., & Hwang, J. (2026). Development of Marker-based Machine Tending Technology Robust to Base Position Errors. Journal of the Korean Society for Precision Engineering, 43(11), 1149-1156. https://doi.org/10.7736/jkspe.026.00063

Vancouver

Chung HW, Kim T, Jung B, Cho CN, Jeong HS, Oh MS, et al. Development of Marker-based Machine Tending Technology Robust to Base Position Errors. Journal of the Korean Society for Precision Engineering. 2026;43(11):1149-1156. doi:10.7736/jkspe.026.00063

BibTeX
@article{Chung2026,
  author = {Chung, Hyun Woo and Kim, Tae-Keun and Jung, Byungjin and Cho, Chang Nho and Jeong, Han Seop and Oh, Myeong Sik and Kim, Gi Hwan and Kim, GaYeon and Hwang, Jung-Hoon},
  title = {Development of Marker-based Machine Tending Technology Robust to Base Position Errors},
  journal = {Journal of the Korean Society for Precision Engineering},
  year = {2026},
  volume = {43},
  number = {11},
  pages = {1149--1156},
  doi = {10.7736/jkspe.026.00063}
}
Kostenlos starten →