EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 3.0

Wire-driven 4-DOF Elbow-wrist Mechanism Design

Haneol Lee, Jongwoo Park, Hyunmin Do, Hyunmok Jung, Joonho Lee, Jeongdo Ahn

Journal of the Korean Society for Precision Engineering · 01.08.2026 · 43 (8) · 837-844

DOI: 10.7736/jkspe.026.00030 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Korean Society for Precision Engineering, erschienen am 01.08.2026. Verfasst von Haneol Lee und 5 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 3.0). Gefördert von: Ministry of Trade, Industry and Energy, Korea Planning and Evaluation Institute of Industrial Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Direct-drive robot arms, often utilized in manipulators and humanoid robots, face challenges related to increased distal mass and reduced backdrivability due to motors being placed at each joint. This paper presents a 4-DOF elbow-wrist mechanism for a robot arm driven by wires. The design includes the upper arm, elbow, upper forearm, lower forearm, and wrist, with all actuators concentrated in the upper arm to minimize distal mass. To achieve this, the mechanism employs rolling-contact joints, forearm rotator idlers, and agonist-antagonist wire pairs. Additionally, a differential mechanism is integrated at the wrist, allowing for yaw rotation at the forearm while enabling roll and pitch rotations at a single point, thereby eliminating inter-axis offset and mimicking human wrist motion. A prototype was fabricated and evaluated, achieving an elbow flexion of 107°, forearm yaw exceeding 90° in both directions, wrist roll of 63° and 50° in each direction, and wrist pitch of 33° in both directions. The independence of each degree of freedom was validated, and torque efficiency from the upper arm to the wrist tip was measured and analyzed.

Förderung

  • Ministry of Trade, Industry and Energy
  • Korea Planning and Evaluation Institute of Industrial Technology

Zitieren

APA

Lee, H., Park, J., Do, H., Jung, H., Lee, J., & Ahn, J. (2026). Wire-driven 4-DOF Elbow-wrist Mechanism Design. Journal of the Korean Society for Precision Engineering, 43(8), 837-844. https://doi.org/10.7736/jkspe.026.00030

Vancouver

Lee H, Park J, Do H, Jung H, Lee J, Ahn J. Wire-driven 4-DOF Elbow-wrist Mechanism Design. Journal of the Korean Society for Precision Engineering. 2026;43(8):837-844. doi:10.7736/jkspe.026.00030

BibTeX
@article{Lee2026,
  author = {Lee, Haneol and Park, Jongwoo and Do, Hyunmin and Jung, Hyunmok and Lee, Joonho and Ahn, Jeongdo},
  title = {Wire-driven 4-DOF Elbow-wrist Mechanism Design},
  journal = {Journal of the Korean Society for Precision Engineering},
  year = {2026},
  volume = {43},
  number = {8},
  pages = {837--844},
  doi = {10.7736/jkspe.026.00030}
}
Kostenlos starten →