EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 3.0

A Study on Optimizing Machining Conditions for Enhanced Surface Roughness in High Tensile Cast Steels

Seong Je Woo, Hyo Chang Kim, Jeon Won Pyo, Sung Ki Lyu

Journal of the Korean Society for Precision Engineering · 01.07.2026 · 43 (7) · 709-716

DOI: 10.7736/jkspe.026.00012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Korean Society for Precision Engineering, erschienen am 01.07.2026. Verfasst von Seong Je Woo und 3 weiteren Autor:innen. Die Arbeit nennt 15 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 3.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study employed the Taguchi method to determine the optimal milling parameters for cast steel, aiming to minimize surface roughness. The analysis indicated that the feed rate was the most significant factor, with lower feed rates resulting in improved surface finish. In contrast, spindle speed and radial depth of cut had minimal impact, while axial depth of cut and tempering temperature emerged as crucial determinants. A linear regression model accounted for 87.46% of the variance in surface roughness. The predicted optimal conditions closely aligned with experimental results, yielding only a 2.93% error and achieving an average surface roughness of 3.033 μm. These findings provide a predictive framework for achieving the desired surface quality in milling processes.

Zitieren

APA

Woo, S. J., Kim, H. C., Pyo, J. W., & Lyu, S. K. (2026). A Study on Optimizing Machining Conditions for Enhanced Surface Roughness in High Tensile Cast Steels. Journal of the Korean Society for Precision Engineering, 43(7), 709-716. https://doi.org/10.7736/jkspe.026.00012

Vancouver

Woo SJ, Kim HC, Pyo JW, Lyu SK. A Study on Optimizing Machining Conditions for Enhanced Surface Roughness in High Tensile Cast Steels. Journal of the Korean Society for Precision Engineering. 2026;43(7):709-716. doi:10.7736/jkspe.026.00012

BibTeX
@article{Woo2026,
  author = {Woo, Seong Je and Kim, Hyo Chang and Pyo, Jeon Won and Lyu, Sung Ki},
  title = {A Study on Optimizing Machining Conditions for Enhanced Surface Roughness in High Tensile Cast Steels},
  journal = {Journal of the Korean Society for Precision Engineering},
  year = {2026},
  volume = {43},
  number = {7},
  pages = {709--716},
  doi = {10.7736/jkspe.026.00012}
}
Kostenlos starten →