EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 3.0

Effect of Initial Filament Moisture Content on Mechanical Behavior of ABS 3D FDM Printed Products

SeokHwan Jung, JiHwan Park, Sung Han Rhim

Journal of the Korean Society for Precision Engineering · 01.07.2026 · 43 (7) · 759-765

DOI: 10.7736/jkspe.026.00001 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of the Korean Society for Precision Engineering, erschienen am 01.07.2026. Verfasst von SeokHwan Jung und 2 weiteren Autor:innen. Die Arbeit nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 3.0). Gefördert von: Korea Institute for Advancement of Technology, Ministry of Trade, Industry and Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused deposition modeling (FDM) is a popular technique for polymer additive manufacturing. However, the hygroscopic nature of thermoplastic filaments can lead to moisture-related defects during extrusion. When moisture is absorbed and vaporizes inside the nozzle, bubbles form, resulting in voids within the extrudate and deposited roads. This can compromise inter-road bonding and diminish mechanical performance. This study examines how the initial moisture content of ABS filaments affects the tensile behavior of parts fabricated by FDM. ABS filaments were conditioned to seven different moisture levels through water immersion for periods ranging from 0 to 12 hours, with moisture content quantified using the loss-in-weight method (ASTM D6980). ASTM D638 Type I specimens were printed under consistent processing conditions and tested in tension (n = 5 per condition). The results showed that ultimate tensile strength (UTS) decreased as filament moisture content increased, with a maximum reduction of 9.3% observed at 0.69% moisture compared to the dried condition (0.05%). Ductility was assessed by measuring strain at break, and its relationship with moisture content is illustrated in Fig. 4, along with statistical analysis (one-way ANOVA and post-hoc comparisons). These findings offer valuable insights for moisture management and quality control in ABS FDM processes.

Förderung

  • Korea Institute for Advancement of Technology
  • Ministry of Trade, Industry and Energy

Zitieren

APA

Jung, S., Park, J., & Rhim, S. H. (2026). Effect of Initial Filament Moisture Content on Mechanical Behavior of ABS 3D FDM Printed Products. Journal of the Korean Society for Precision Engineering, 43(7), 759-765. https://doi.org/10.7736/jkspe.026.00001

Vancouver

Jung S, Park J, Rhim SH. Effect of Initial Filament Moisture Content on Mechanical Behavior of ABS 3D FDM Printed Products. Journal of the Korean Society for Precision Engineering. 2026;43(7):759-765. doi:10.7736/jkspe.026.00001

BibTeX
@article{Jung2026,
  author = {Jung, SeokHwan and Park, JiHwan and Rhim, Sung Han},
  title = {Effect of Initial Filament Moisture Content on Mechanical Behavior of ABS 3D FDM Printed Products},
  journal = {Journal of the Korean Society for Precision Engineering},
  year = {2026},
  volume = {43},
  number = {7},
  pages = {759--765},
  doi = {10.7736/jkspe.026.00001}
}
Kostenlos starten →