Precision Synchronization Control of Dual-drive Gantry Stage via Slidingmode Controller with Torque Disturbance Compensation
Journal of the Korean Society for Precision Engineering · 01.08.2026 · 43 (8) · 825-835
DOI: 10.7736/jkspe.025.00044 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of the Korean Society for Precision Engineering, erschienen am 01.08.2026. Verfasst von Jung Ho Han und 8 weiteren Autor:innen. Die Arbeit nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 3.0). Gefördert von: National Research Foundation of Korea, Ministry of Science and ICT, Korea Planning and Evaluation Institute of Technology.
Abstract (Originalsprache)
Dual-drive H-type gantry stages, powered by direct-drive linear motors, are commonly used in precision industrial applications that require high positioning accuracy over a large workspace. The cross-arm rigidly couples the two parallel axes, making strict synchronization control essential for maintaining positioning accuracy. Conventional master-master control treats the coupling effects as disturbances without accounting for the synchronization of the two motors. As a result, its performance deteriorates significantly under non-uniform load distribution, payload rotation, and directly applied torque disturbances, all of which necessitate reliable synchronization control. This study proposes a synchronization control scheme that integrates a sliding-mode controller with an uncertainty and disturbance estimator (SMC-UDE) and a feedforward torque compensator for the inertial torque induced by payload rotation. The proposed controller was implemented on a Hardware-in-the-Loop (HIL) simulator constructed with two parallel voice coil motors, and its performance was experimentally validated on the testbed. The HIL experimental results demonstrate that the SMC-UDE controller with feedforward torque-disturbance compensation achieves a quicker settling time compared to the conventional master-master control strategy. Additionally, it effectively suppresses disturbances generated by a rotary motor attached to a payload, thereby maintaining synchronization accuracy under disturbed conditions.
Förderung
- National Research Foundation of Korea
- Ministry of Science and ICT
- Korea Planning and Evaluation Institute of Technology
- Ministry of Trade, Industry and Energy
Zitieren
APA
Han, J. H., Lee, S., Lee, G. H., Lee, H. G., Jang, H. S., Jeon, B. W., Kim, T. S., Im, H. S., & Yoon, J. Y. (2026). Precision Synchronization Control of Dual-drive Gantry Stage via Slidingmode Controller with Torque Disturbance Compensation. Journal of the Korean Society for Precision Engineering, 43(8), 825-835. https://doi.org/10.7736/jkspe.025.00044
Vancouver
Han JH, Lee S, Lee GH, Lee HG, Jang HS, Jeon BW, et al. Precision Synchronization Control of Dual-drive Gantry Stage via Slidingmode Controller with Torque Disturbance Compensation. Journal of the Korean Society for Precision Engineering. 2026;43(8):825-835. doi:10.7736/jkspe.025.00044
BibTeX
@article{Han2026,
author = {Han, Jung Ho and Lee, Sangmin and Lee, Gi Hun and Lee, Hyo Geon and Jang, Hong Sun and Jeon, Byung Wook and Kim, Tae Sung and Im, Hyeon Seok and Yoon, Jun Young},
title = {Precision Synchronization Control of Dual-drive Gantry Stage via Slidingmode Controller with Torque Disturbance Compensation},
journal = {Journal of the Korean Society for Precision Engineering},
year = {2026},
volume = {43},
number = {8},
pages = {825--835},
doi = {10.7736/jkspe.025.00044}
}
EUVIMED