Effects of Specimen Holder Configurations on the Combustion Characteristics of PMMA in a Cone Calorimeter
Fire Science and Engineering · 31.10.2026 · 40 (5) · 8-18
DOI: 10.7731/kifse.2b0d4322 ↗Kurz gefasst
Fachartikel in der Zeitschrift Fire Science and Engineering, erschienen am 31.10.2026. Verfasst von Jae-Ho Cho und 1 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: Ministry of Climate, Energy and Environment, Korea Energy Technology Evaluation and Planning.
Abstract (Originalsprache)
This study compared the combustion characteristics of black poly (methyl methacrylate) (PMMA) for different specimen holder configurations using an ISO 5660-1-based cone calorimeter. Identical PMMA specimens were tested using a standard holder with a retainer frame and a modified holder without a retainer frame, in which the specimen was surrounded by a ceramic fiber board and its entire upper surface was exposed. The tests were conducted at an external heat flux of 20–50 kW/m2. The ignition times were similar for both holders; however, the burning duration of the modified holder decreased by approximately 55.7% and 56.5% at 20 and 50 kW/m2, respectively. The mass loss rate and heat release rate were higher for the modified holder, and the differences remained after normalization to the exposed area, as shown by the MLRPUA and HRRPUA. By contrast, the total heat release was similar for both holders, whereas the THRPUA of the modified holder was approximately 12.2% lower than that of the standard holder, primarily reflecting normalization by its larger exposed area. The effective heat of combustion was approximately 7.8% lower for the modified holder. These results indicate that cone calorimeter measurements should be compared and interpreted by considering the overall specimen holder configuration, including the exposed area, retainer frame, and surrounding thermal boundary conditions.
Förderung
- Ministry of Climate, Energy and Environment
- Korea Energy Technology Evaluation and Planning
Zitieren
APA
Cho, J., & Hwang, C. (2026). Effects of Specimen Holder Configurations on the Combustion Characteristics of PMMA in a Cone Calorimeter. Fire Science and Engineering, 40(5), 8-18. https://doi.org/10.7731/kifse.2b0d4322
Vancouver
Cho J, Hwang C. Effects of Specimen Holder Configurations on the Combustion Characteristics of PMMA in a Cone Calorimeter. Fire Science and Engineering. 2026;40(5):8-18. doi:10.7731/kifse.2b0d4322
BibTeX
@article{Cho2026,
author = {Cho, Jae-Ho and Hwang, Cheol-Hong},
title = {Effects of Specimen Holder Configurations on the Combustion Characteristics of PMMA in a Cone Calorimeter},
journal = {Fire Science and Engineering},
year = {2026},
volume = {40},
number = {5},
pages = {8--18},
doi = {10.7731/kifse.2b0d4322}
}
EUVIMED