Development and biomechanical validation of a whole spine–thorax finite element model for quantitative biomechanical analysis
PeerJ · 2026
DOI: 10.7717/peerj.20961 ↗Kurz gefasst
Validierungsstudie in der Zeitschrift PeerJ, 2026. Verfasst von Junhua Li und 10 weiteren Autor:innen. Beteiligte Einrichtung: The Affiliated Traditional Chinese Medicine Hospital, Guangzhou Medical University, Guangzhou, China. Hauptthemen laut MEDLINE: Finite Element Analysis, Thorax, Spine. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Basic and Applied Basic Research Foundation, National Natural Science Foundation of China, President Foundation of the Third Affiliated Hospital of Southern Medical University.
Abstract (Originalsprache)
Objective
To develop a high-fidelity three-dimensional finite element model of the whole spine–thorax complex based on high-resolution computed tomography (CT) images of a healthy adult male, and to perform initial validation under representative loading conditions for quantitative analysis of load transmission, coupled motion, and stress distribution. We hypothesized that the model would reproduce published quasi-static segmental moment–rotation behavior and cadaveric thoracic impact responses within acceptable error ranges.
Methods
High-resolution CT data of one healthy adult Chinese male volunteer (25 years; 175 cm; 70 kg) were used to reconstruct detailed anatomical structures, including vertebrae, intervertebral discs, ribs, costal cartilage, sternum, ligaments, respiratory muscles, lungs, and heart. Material properties were assigned based on literature data, and nonlinear contacts were defined among articular and cartilaginous structures. Model validation was carried out using two scenarios: pure-moment loading of the T12–L1 functional spinal unit and a frontal chest impact simulation, with the numerical responses compared against available experimental and cadaveric data.
Results
The T12–L1 moment–rotation curves agreed well with published biomechanical ranges, and the frontal impact simulation produced a peak force (3,270 N) and chest compression (79 mm) closely matching experimental results (3,453 N and 80 mm), with errors of 5.3% and 1.25%, respectively.
Conclusions
The finite element model reproduced static and dynamic responses of the spine–thorax complex within available experimental ranges for the loading conditions examined, providing an initial, non-invasive platform for investigating load transmission, coupled motion, and stress distribution under physiological, pathological, and interventional conditions.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- The Affiliated Traditional Chinese Medicine Hospital, Guangzhou Medical University, Guangzhou, China.
- School of Traditional Chinese Medicine, Southern Medical University, Guangzhou, China.
- The Third Affiliated Hospital of Southern Medical University, Guangzhou, China.
Förderung
- Guangdong Basic and Applied Basic Research Foundation
- National Natural Science Foundation of China
- President Foundation of the Third Affiliated Hospital of Southern Medical University
- Plan on Enhancing Scientific Research in GMU
Zitieren
APA
Li, J., Yu, Y., Lin, Y., Liu, H., Zhong, W., Tang, L., Chen, D., Ye, Y., Lin, X., Tian, T., & Li, Y. (2026). Development and biomechanical validation of a whole spine–thorax finite element model for quantitative biomechanical analysis. PeerJ. https://doi.org/10.7717/peerj.20961
Vancouver
Li J, Yu Y, Lin Y, Liu H, Zhong W, Tang L, et al. Development and biomechanical validation of a whole spine–thorax finite element model for quantitative biomechanical analysis. PeerJ. 2026. doi:10.7717/peerj.20961
BibTeX
@article{Li2026,
author = {Li, Junhua and Yu, Yaoshuai and Lin, Yuanxun and Liu, Hongwen and Zhong, Weixing and Tang, Lixin and Chen, Diangu and Ye, Yongliang and Lin, Xiaoguang and Tian, Tianzhao and Li, Yikai},
title = {Development and biomechanical validation of a whole spine–thorax finite element model for quantitative biomechanical analysis},
journal = {PeerJ},
year = {2026},
doi = {10.7717/peerj.20961}
}
EUVIMED