Development and validation of lumbar spine finite element model
PeerJ · 2023
DOI: 10.7717/peerj.15805 ↗Kurz gefasst
Fachartikel in der Zeitschrift PeerJ, 2023. Verfasst von Tomasz Wiczenbach und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanics of Materials and Structures, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology, Gdańsk, Pomeran…. Hauptthemen laut MEDLINE: Intervertebral Disc, Annulus Fibrosus, Nucleus Pulposus. Die Arbeit wurde bisher 28-mal zitiert (Crossref) und nennt 68 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The National Science Centre of Poland.
Abstract (Originalsprache)
The functional biomechanics of the lumbar spine have been better understood by finite element method (FEM) simulations. However, there are still areas where the behavior of soft tissues can be better modeled or described in a different way. The purpose of this research is to develop and validate a lumbar spine section intended for biomechanical research. A FE model of the 50th percentile adult male (AM) Total Human Model for Safety (THUMS) v6.1 was used to implement the modifications. The main modifications were to apply orthotropic material properties and nonlinear stress-strain behavior for ligaments, hyperelastic material properties for annulus fibrosus and nucleus pulposus, and the specific content of collagenous fibers in the annulus fibrosus ground substance. Additionally, a separation of the nucleus pulposus from surrounding bones and tissues was implemented. The FE model was subjected to different loading modes, in which intervertebral rotations and disc pressures were calculated. Loading modes contained different forces and moments acting on the lumbar section: axial forces (compression and tension), shear forces, pure moments, and combined loading modes of axial forces and pure moments. The obtained ranges of motion from the modified numerical model agreed with experimental data for all loading modes. Moreover, intradiscal pressure validation for the modified model presented a good agreement with the data available from the literature. This study demonstrated the modifications of the THUMS v6.1 model and validated the obtained numerical results with existing literature in the sub-injurious range. By applying the proposed changes, it is possible to better model the behavior of the human lumbar section under various loads and moments.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Mechanics of Materials and Structures, Faculty of Civil and Environmental Engineering, Gdańsk University of Technology, Gdańsk, Pomerania, Poland.
- 2nd Division of Orthopedics & Kinetic Organ Traumatology, Faculty of Medicine, Medical University of Gdańsk, Gdańsk, Pomerania, Poland.
Förderung
- The National Science Centre of Poland
Zitieren
APA
Wiczenbach, T., Pachocki, L., Daszkiewicz, K., Łuczkiewicz, P., & Witkowski, W. (2023). Development and validation of lumbar spine finite element model. PeerJ. https://doi.org/10.7717/peerj.15805
Vancouver
Wiczenbach T, Pachocki L, Daszkiewicz K, Łuczkiewicz P, Witkowski W. Development and validation of lumbar spine finite element model. PeerJ. 2023. doi:10.7717/peerj.15805
BibTeX
@article{Wiczenbach2023,
author = {Wiczenbach, Tomasz and Pachocki, Lukasz and Daszkiewicz, Karol and Łuczkiewicz, Piotr and Witkowski, Wojciech},
title = {Development and validation of lumbar spine finite element model},
journal = {PeerJ},
year = {2023},
doi = {10.7717/peerj.15805}
}
EUVIMED