Disinfection efficacy of sodium hypochlorite and glutaraldehyde and their effects on the dimensional stability and surface properties of dental impressions: a systematic review
PeerJ · 20.02.2023 · 11 · e14868
DOI: 10.7717/peerj.14868 ↗Kurz gefasst
Systematische Übersicht in der Zeitschrift PeerJ, online erschienen am 20.02.2023. Verfasst von Yuan Qiu und 6 weiteren Autor:innen. Beteiligte Einrichtung: Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Dental Materials and Devices for Zhejiang Provincial Engineering…. Hauptthemen laut MEDLINE: Sodium Hypochlorite, Disinfectants. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Objective
To systematically evaluate the disinfection efficacy of the two most frequently used disinfectants, sodium hypochlorite and glutaraldehyde, and their effects on the surface properties of four different dental impression materials.
Methods
A systematic literature search was performed in four databases until May 1st, 2022 to select the studies which evaluated disinfection efficacy of disinfectants or surface properties of dental impressions after chemical disinfection. Main results A total of 50 studies were included through electronic database searches. Of these studies, 13 studies evaluated disinfection efficacy of two disinfectants, and 39 studies evaluated their effects on the surface properties of dental impressions. A 10-minute disinfection with 0.5–1% sodium hypochlorite or 2% glutaraldehyde was effective to inactivate oral flora and common oral pathogenic bacteria. With regard to surface properties, chemical disinfection within 30 min could not alter the dimensional stability, detail reproduction and wettability of alginate and polyether impressions. However, the wettability of addition silicone impressions and the dimensional stability of condensation silicone impressions were adversely affected after chemical disinfection, while other surface properties of these two dental impressions were out of significant influence.
Conclusions
Alginate impressions are strongly recommended to be disinfected with 0.5% sodium hypochlorite using spray disinfection method for 10 min. Meanwhile, elastomeric impressions are strongly recommended to be disinfected with 0.5% sodium hypochlorite or 2% glutaraldehyde using immersion disinfection method for 10 min, however, polyether impression should be disinfected with 2% glutaraldehyde.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Stomatology Hospital, School of Stomatology, Zhejiang University School of Medicine, Dental Materials and Devices for Zhejiang Provincial Engineering Research Center, Zhejiang Provincial Clinical Research Center for Ora…
Zitieren
APA
Qiu, Y., Xu, J., Xu, Y., Shi, Z., Wang, Y., Zhang, L., & Fu, B. (2023). Disinfection efficacy of sodium hypochlorite and glutaraldehyde and their effects on the dimensional stability and surface properties of dental impressions: a systematic review. PeerJ, 11, e14868. https://doi.org/10.7717/peerj.14868
Vancouver
Qiu Y, Xu J, Xu Y, Shi Z, Wang Y, Zhang L, et al. Disinfection efficacy of sodium hypochlorite and glutaraldehyde and their effects on the dimensional stability and surface properties of dental impressions: a systematic review. PeerJ. 2023;11:e14868. doi:10.7717/peerj.14868
BibTeX
@article{Qiu2023,
author = {Qiu, Yuan and Xu, Jiawei and Xu, Yuedan and Shi, Zhiwei and Wang, Yinlin and Zhang, Ling and Fu, Baiping},
title = {Disinfection efficacy of sodium hypochlorite and glutaraldehyde and their effects on the dimensional stability and surface properties of dental impressions: a systematic review},
journal = {PeerJ},
year = {2023},
volume = {11},
pages = {e14868},
doi = {10.7717/peerj.14868}
}
EUVIMED