EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Lipid extraction from microalgae using pure caprolactam-based ionic liquids and with organic co-solvent

Rania A. Naiyl, Fredrick O. Kengara, Kirimi H. Kiriamiti, Yousif A. Ragab

PeerJ Analytical Chemistry · 2022

DOI: 10.7717/peerj-achem.13 ↗

Kurz gefasst

Fachartikel in der Zeitschrift PeerJ Analytical Chemistry, 2022. Verfasst von Rania A. Naiyl und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Africa Centre of Excellence II in Phytochemicals Textile and Renewable Energy.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Background

The main process limitation of microalgae biofuel technology is lack of cost-effective and efficient lipid extraction methods. Thus, the aim of this study was to investigate the effectiveness and efficiency of six caprolactam-based ionic liquids (CPILs) namely, Caprolactamium chloride, Caprolactamium methyl sulphonate, Caprolactamium trifluoromethane sulfonate, Caprolactamium acetate, Caprolactamium hydrogen sulphate and Caprolactamium trifluoromethane-acetate—for extraction of lipids from wet and dry Spirulina platensis microalgae biomass. Of these, the first three are novel CPILs.

Methods

The caprolactam-based ionic liquids (CPILs) were formed by a combination of caprolactam with different organic and inorganic Brønsted acids, and used for lipid extraction from wet and dry S. platensis microalgae biomass. Extraction of microalgae was performed in a reflux at 95 °C for 2 h using pure CPILs and mixtures of CPIL with methanol (as co-solvent) in a ratio of 1:1 (w/w). The microalgae biomass was mixed with the ILs/ methanol in a ratio of 1:19 (w/w) under magnetic stirring.

Results

The yield by control experiment from dry and wet biomass was found to be 9.5% and 4.1%, respectively. A lipid recovery of 10% from dry biomass was recorded with both caprolactamium acetate (CPAA) and caprolactamium trifluoroacetate (CPTFA), followed by caprolactamium chloride (CPHA, 9.3 ± 0.1%). When the CPILs were mixed with methanol, observable lipids’ yield enhancement of 14% and 8% (CPAA), 13% and 5% (CPTFA), and 11% and 6% (CPHA) were recorded from dry and wet biomass, respectively. The fatty acid composition showed that C 16 and C 18 were dominant, and this is comparable to results obtained from the traditional solvent (methanol-hexane) extraction method. The lower level of pigments in the lipids extracted with CPHA and CPTFA is one of the advantages of using CPILs because they lower the cost of biodiesel production by reducing the purification steps.

Conclusion

In conclusion, the three CPILs, CPAA, CPHA and CPTFA can be considered as promising green solvents in terms of energy and cost saving in the lipid extraction and thus biodiesel production process.

Förderung

  • Africa Centre of Excellence II in Phytochemicals Textile and Renewable Energy

Zitieren

APA

Naiyl, R. A., Kengara, F. O., Kiriamiti, K. H., & Ragab, Y. A. (2022). Lipid extraction from microalgae using pure caprolactam-based ionic liquids and with organic co-solvent. PeerJ Analytical Chemistry. https://doi.org/10.7717/peerj-achem.13

Vancouver

Naiyl RA, Kengara FO, Kiriamiti KH, Ragab YA. Lipid extraction from microalgae using pure caprolactam-based ionic liquids and with organic co-solvent. PeerJ Analytical Chemistry. 2022. doi:10.7717/peerj-achem.13

BibTeX
@article{Naiyl2022,
  author = {Naiyl, Rania A. and Kengara, Fredrick O. and Kiriamiti, Kirimi H. and Ragab, Yousif A.},
  title = {Lipid extraction from microalgae using pure caprolactam-based ionic liquids and with organic co-solvent},
  journal = {PeerJ Analytical Chemistry},
  year = {2022},
  doi = {10.7717/peerj-achem.13}
}
Kostenlos starten →