EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evolution and mechanism of contact resistance of copper–aluminum electrical connectors in lithium-ion power batteries

Junlian Ge, Jialin Zhu, Biao Ge, Leon Sandforth, Junying Min*

Computer Methods in Materials Science · 26.06.2026 · 26 (2) · 5-22

DOI: 10.7494/cmms.2026.2.1041 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Computer Methods in Materials Science, online erschienen am 26.06.2026. Verfasst von Junlian Ge und 4 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the sensitivity of factors influencing the contact resistance and reliability assessment of bolted copper–aluminum electrical connectors. Through continuous energized dynamic testing, the temporal evolution of the contact resistance and temperature of the contact area were monitored throughout the experiment. In conjunction with observations of contact surface morphology and microstructural composition analysis, the intrinsic mechanisms underlying anomalous changes in contact resistance were explored in depth. The results indicated that, during continuous current flow, the contact resistance of aluminum busbar assemblies without plating exhibited an “initially low → rapid increase → gradual stabilization” pattern, whereas nickel-plated aluminum assemblies maintained stable resistance. Quantitatively, the contact resistance of the nickel-plated group remained at approximately 15 μΩ, while that of the bare aluminum group rose to 400–750 μΩ. The evolution of the contact interface was asymmetric, with the dynamic growth of the oxide layer on the aluminum surface being the dominant mechanism increasing resistance. Moreover, the aluminum coating significantly reduced contact resistance and enhanced connection reliability.

Zitieren

APA

Ge, J., Zhu, J., Ge, B., Sandforth, L., & Min*, J. (2026). Evolution and mechanism of contact resistance of copper–aluminum electrical connectors in lithium-ion power batteries. Computer Methods in Materials Science, 26(2), 5-22. https://doi.org/10.7494/cmms.2026.2.1041

Vancouver

Ge J, Zhu J, Ge B, Sandforth L, Min* J. Evolution and mechanism of contact resistance of copper–aluminum electrical connectors in lithium-ion power batteries. Computer Methods in Materials Science. 2026;26(2):5-22. doi:10.7494/cmms.2026.2.1041

BibTeX
@article{Ge2026,
  author = {Ge, Junlian and Zhu, Jialin and Ge, Biao and Sandforth, Leon and Min*, Junying},
  title = {Evolution and mechanism of contact resistance of copper–aluminum electrical connectors in lithium-ion power batteries},
  journal = {Computer Methods in Materials Science},
  year = {2026},
  volume = {26},
  number = {2},
  pages = {5--22},
  doi = {10.7494/cmms.2026.2.1041}
}
Kostenlos starten →