EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Geometric optimization of two-stage stamping dies for ultra-thin titanium bipolar plates using Sequential Physics-Informed Neural Networks

Zijie Ke, Yiwen Huang, Ziqiang Guo, Yao Xiao*, Zeran Hou, Junying Min

Computer Methods in Materials Science · 29.04.2026 · 26 (1) · 23-42

DOI: 10.7494/cmms.2026.1.1038 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Computer Methods in Materials Science, online erschienen am 29.04.2026. Verfasst von Zijie Ke und 5 weiteren Autor:innen. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bipolar plates are critical core components in proton exchange membrane fuel cells (PEMFCs). Titanium-based materials are highly favored due to their excellent corrosion resistance and high specific strength. However, the plates often experience severe local thinning and poor consistency in forming dimensions during the two-stage stamping process. Although traditional finite element method (FEM) optimization can mitigate these defects, it comes with high computational costs and time consumption. This study proposes a die design optimization framework based on the Sequential Physics-Informed Neural Network (S-PINN). Unlike traditional single-layer neural network models, S-PINN adopts a sequential architecture that effectively maps the two-stage forming process of the plates. This architecture can explicitly predict the evolution of forming quality from the pre-forming stage to the final stage. By embedding the core physical laws of plastic deformation into the network loss function, the S-PINN model effectively predicts the complex nonlinear relationship between mold geometry and forming quality, while ensuring physical consistency. Experimental and simulation results show that the S-PINN model’s prediction accuracy for dimensional consistency (DC) is 73.8% higher than that of the PINN model and 33.9% higher than that of the S-ANN model. Compared with traditional modeling methods, the S-PINN-optimized die design can reduce the thinning rate and improve channel dimensional consistency.

Zitieren

APA

Ke, Z., Huang, Y., Guo, Z., Xiao*, Y., Hou, Z., & Min, J. (2026). Geometric optimization of two-stage stamping dies for ultra-thin titanium bipolar plates using Sequential Physics-Informed Neural Networks. Computer Methods in Materials Science, 26(1), 23-42. https://doi.org/10.7494/cmms.2026.1.1038

Vancouver

Ke Z, Huang Y, Guo Z, Xiao* Y, Hou Z, Min J. Geometric optimization of two-stage stamping dies for ultra-thin titanium bipolar plates using Sequential Physics-Informed Neural Networks. Computer Methods in Materials Science. 2026;26(1):23-42. doi:10.7494/cmms.2026.1.1038

BibTeX
@article{Ke2026,
  author = {Ke, Zijie and Huang, Yiwen and Guo, Ziqiang and Xiao*, Yao and Hou, Zeran and Min, Junying},
  title = {Geometric optimization of two-stage stamping dies for ultra-thin titanium bipolar plates using Sequential Physics-Informed Neural Networks},
  journal = {Computer Methods in Materials Science},
  year = {2026},
  volume = {26},
  number = {1},
  pages = {23--42},
  doi = {10.7494/cmms.2026.1.1038}
}
Kostenlos starten →