EUVIMEDEUVIMED entdecken
Crossref

Mechanical Properties of Filament Wound Pipes: Effects of Winding Angles

Simona Naseva, Vineta Srebrenkoska, Svetlana Risteska, Maja Stefanovska, Sara Srebrenkoska

Quality of Life (Banja Luka) - APEIRON · 28.07.2015 · 11 (1-2)

DOI: 10.7251/qol1501010n ↗

Kurz gefasst

Fachartikel in der Zeitschrift Quality of Life (Banja Luka) - APEIRON, online erschienen am 28.07.2015. Verfasst von Simona Naseva und 4 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this study is to investigate the mechanical properties of continuous glass fiber reinforced composite tubes produced by filament winding technique with three different winding angles. With help of split-disk tests hoop tensile properties of selected specimens were determined, where reliable results were obtained with low standard deviations. It was observed that bigger winding angle lead to higher hoop tensile properties of filament wound tubular samples. Also, the effect of reinforcement direction on the mechanical performances of these composites has been presented. Fiber fracture and fiber-matrix debonding is observed to be the dominant failure mechanisms by samples winded with bigger winding angles, whereas delamination in addition to these mechanisms is detected by samples with smaller winding angles. From received results it is concluded that, mechanical properties of composite specimens are depended from winding angles in filament winding technology.With help of conducted SEM analysis good merger between glass fibers and the epoxy matrix was seen, but cracks within plies and broken fiber were noticed, due to the high fiber branching.

Zitieren

APA

Naseva, S., Srebrenkoska, V., Risteska, S., Stefanovska, M., & Srebrenkoska, S. (2015). Mechanical Properties of Filament Wound Pipes: Effects of Winding Angles. Quality of Life (Banja Luka) - APEIRON, 11(1-2). https://doi.org/10.7251/qol1501010n

Vancouver

Naseva S, Srebrenkoska V, Risteska S, Stefanovska M, Srebrenkoska S. Mechanical Properties of Filament Wound Pipes: Effects of Winding Angles. Quality of Life (Banja Luka) - APEIRON. 2015;11(1-2). doi:10.7251/qol1501010n

BibTeX
@article{Naseva2015,
  author = {Naseva, Simona and Srebrenkoska, Vineta and Risteska, Svetlana and Stefanovska, Maja and Srebrenkoska, Sara},
  title = {Mechanical Properties of Filament Wound Pipes: Effects of Winding Angles},
  journal = {Quality of Life (Banja Luka) - APEIRON},
  year = {2015},
  volume = {11},
  number = {1-2},
  doi = {10.7251/qol1501010n}
}
Kostenlos starten →