EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Zeolites for Selective CO2 Adsorption

Bernhard Zettl, Gayaneh Issayan

CONECT. International Scientific Conference of Environmental and Climate Technologies · 08.05.2026 · 119-120

DOI: 10.7250/conect.2026.068 ↗

Kurz gefasst

Fachartikel in der Zeitschrift CONECT. International Scientific Conference of Environmental and Climate Technologies, online erschienen am 08.05.2026. Verfasst von Bernhard Zettl und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work investigates the selective CO₂ adsorption behaviour of various synthetic zeolites and provides a comparative assessment of their sorptive performance and regeneration characteristics under controlled conditions. CO₂ capture in zeolites plays an essential role in gas purification, sorption-enhanced reaction processes, and decentralized renewable energy systems, where efficient adsorption–desorption cycles directly impact process energy demand and operational stability. In this study, several zeolite types – including Faujasite-based materials (YBF, YK, 13XBF, 13XK) and LTA-type zeolites (4A, 5A, 3A) – were evaluated for their CO₂ uptake capacity under an applied pressure of 1 bar gauge (2 bar absolute). To ensure reproducibility, all samples were fully desorbed at 250 °C prior to CO₂ loading. The measured CO₂ adsorption capacities ranged from 2.5 to 5.4 mmol/g, with Faujasite-type zeolites exhibiting the highest uptake. The maximum capacity of 5.4 mmol/g, corresponding to approximately 25 wt% CO₂, was observed for binder-free Y-type zeolite (YBF). The preferred adsorption of water relative to CO₂ – rooted in the significantly higher dipole moment and adsorption enthalpy of H₂O – means that CO₂ adsorption is strongly affected by the hydration state of the zeolite. Consequently, complete removal of moisture is essential to achieving maximum CO₂ uptake. The experiments confirm that CO₂ remains in the gaseous state within the pores during adsorption due to its low critical temperature (31 °C), resulting in a lower reaction enthalpy compared to water and enabling rapid, low-energy desorption. Desorption studies demonstrate that CO₂ can be released either through exposure to ambient air, where water vapour displaces the adsorbed CO₂, or via controlled thermal treatment, which is more energy-efficient for subsequent reloading. Overall, the results highlight strong material-dependent differences in CO₂ capacity, fast and low-enthalpy regeneration behaviour, and the suitability of Faujasite-type zeolites – particularly binder-free variants – for cyclic CO₂ adsorption processes. The findings contribute to the optimization of zeolitic sorbents for gas-separation, methanation, and renewable energy applications, where rapid and energy-efficient CO₂ handling is essential.

Zitieren

APA

Zettl, B., & Issayan, G. (2026). Zeolites for Selective CO2 Adsorption. CONECT. International Scientific Conference of Environmental and Climate Technologies, 119-120. https://doi.org/10.7250/conect.2026.068

Vancouver

Zettl B, Issayan G. Zeolites for Selective CO2 Adsorption. CONECT. International Scientific Conference of Environmental and Climate Technologies. 2026:119-120. doi:10.7250/conect.2026.068

BibTeX
@article{Zettl2026,
  author = {Zettl, Bernhard and Issayan, Gayaneh},
  title = {Zeolites for Selective CO2 Adsorption},
  journal = {CONECT. International Scientific Conference of Environmental and Climate Technologies},
  year = {2026},
  pages = {119--120},
  doi = {10.7250/conect.2026.068}
}
Kostenlos starten →