EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

MCFC as Electrochemical Devices for CO2 Capture and Production of Synthetic Fuels

Karolina Majewska

CONECT. International Scientific Conference of Environmental and Climate Technologies · 08.05.2026 · 106

DOI: 10.7250/conect.2026.057 ↗

Kurz gefasst

Fachartikel in der Zeitschrift CONECT. International Scientific Conference of Environmental and Climate Technologies, online erschienen am 08.05.2026. Verfasst von Karolina Majewska. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Molten Carbonate Fuel Cells (MCFCs) enable simultaneous electrochemical CO₂ capture and power generation by selectively extracting CO₂ from flue gases at high temperature. This study analyses the integration of an MCFC downstream of a coal-fired power plant, treating the system as both a decarbonization unit and a CO₂ concentration platform for synthetic fuel production. System-level modelling shows that MCFC integration can reduce net CO₂ emissions by up to 56 % (288 kg CO₂/MWh) while increasing total electrical power output, demonstrating the potential of MCFCs as a bridging technology between carbon capture and Power-to-Fuels systems. Separating CO₂ from flue gases using a molten carbonate fuel cell The Molten Carbonate Fuel Cell (MCFC) can simultaneously capture CO₂ from flue gas and increase total power generation due to its high electrical efficiency. In the analysed system, MCFC operation is optimized with respect to power generation efficiency while enabling electrochemical CO₂ separation. Fuel cell efficiency is defined on a higher heating value basis. Because coal-fired flue gas contains insufficient oxygen, additional air is supplied to achieve a CO₂/O₂ molar ratio of approximately 2.0. The system configuration, shown in figure, integrates the MCFC stack with four heat exchangers to recover heat from fuel, steam, and flue gas streams. Optimization variables include fuel flow rate, current density, heat exchanger effectiveness, and air addition, subject to constraints on maximum stack temperature (650 °C), positive cell voltage, and a minimum steam-to carbon ratio of 1.4. CO₂ removal is quantified based on the reduction of CO₂ mass flow at the cathode. The results show that the MCFC produces 2.7–3.2 kW per Nm³·s⁻¹ of flue gas, increases total plant power output by about 50%, and achieves fuel cell efficiencies of 37–41 %. Depending on the optimization target, CO₂ emission reduction reaches up to 70 %, confirming the suitability of MCFC technology for efficient CO₂ capture in existing fossil-fuel-based power plants.

Zitieren

APA

Majewska, K. (2026). MCFC as Electrochemical Devices for CO2 Capture and Production of Synthetic Fuels. CONECT. International Scientific Conference of Environmental and Climate Technologies, 106. https://doi.org/10.7250/conect.2026.057

Vancouver

Majewska K. MCFC as Electrochemical Devices for CO2 Capture and Production of Synthetic Fuels. CONECT. International Scientific Conference of Environmental and Climate Technologies. 2026:106. doi:10.7250/conect.2026.057

BibTeX
@article{Majewska2026,
  author = {Majewska, Karolina},
  title = {MCFC as Electrochemical Devices for CO2 Capture and Production of Synthetic Fuels},
  journal = {CONECT. International Scientific Conference of Environmental and Climate Technologies},
  year = {2026},
  pages = {106},
  doi = {10.7250/conect.2026.057}
}
Kostenlos starten →