THE EFFECT OF INCORPORATING COPPER OXIDE NANOPARTICLES ON THE PROPERTIES OF RECYCLED ACRYLIC FIBERS MADE BY ELECTROSPINNING
Tekstil ve Mühendis · 30.06.2026 · 33 (142) · 42-48
DOI: 10.7216/teksmuh.1771602 ↗Kurz gefasst
Fachartikel in der Zeitschrift Tekstil ve Mühendis, online erschienen am 30.06.2026. Verfasst von Ghazal Tuhmaz und 1 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben.
Abstract (Originalsprache)
Electrospinning is a simple and effective method to obtain nanofibers with distinctive properties such as large surface area to weight and high porosity, which make them attractive for many applications. In this research, electrospinning technology was used to obtain nano non-woven mats using acrylic nanofibers (PAN) with copper oxide nanoparticles to improve the moisture absorption of the acrylonitrile polymer. CuO NPs were prepared and characterized. It was found that the average diameter of the particles is 28.5 nm. 6% polyacrylonitrile solution was prepared in a 50/50 mixture of acetone and dimethylformamide to produce nano non-woven mats. The nanoparticles were added to the polymer solution at several concentrations (0.25, 0.5, 1%). Samples were then prepared using an electrospinning device. In the end, 4 nano mats were obtained. They were characterized using a scanning electron microscope. It was shown that the diameters of nanofibers increased with increasing copper oxide concentration in the polymeric solution. Then, several tests were carried out to measure the ability of the prepared non-woven mats to absorb moisture, including measuring drop contact angle and absorption capacity test. After recording the results and comparing the samples, it was concluded that by increasing the concentration of CuO NPs, the absorbance improves significantly compared to the reference sample. Resulted non-woven mats can be used in applications that benefit the field of textiles and nonwovens by investing in acrylic exhaust, thus achieving an impact in the field of environmental protection with sustainable nanofibers as well as supporting the industry at the same time.
Zitieren
APA
Tuhmaz, G., & Sharouf, H. (2026). THE EFFECT OF INCORPORATING COPPER OXIDE NANOPARTICLES ON THE PROPERTIES OF RECYCLED ACRYLIC FIBERS MADE BY ELECTROSPINNING. Tekstil ve Mühendis, 33(142), 42-48. https://doi.org/10.7216/teksmuh.1771602
Vancouver
Tuhmaz G, Sharouf H. THE EFFECT OF INCORPORATING COPPER OXIDE NANOPARTICLES ON THE PROPERTIES OF RECYCLED ACRYLIC FIBERS MADE BY ELECTROSPINNING. Tekstil ve Mühendis. 2026;33(142):42-48. doi:10.7216/teksmuh.1771602
BibTeX
@article{Tuhmaz2026,
author = {Tuhmaz, Ghazal and Sharouf, Hoda},
title = {THE EFFECT OF INCORPORATING COPPER OXIDE NANOPARTICLES ON THE PROPERTIES OF RECYCLED ACRYLIC FIBERS MADE BY ELECTROSPINNING},
journal = {Tekstil ve Mühendis},
year = {2026},
volume = {33},
number = {142},
pages = {42--48},
doi = {10.7216/teksmuh.1771602}
}
EUVIMED