EUVIMEDEUVIMED entdecken
Crossref

Investigating on surface roughness of nanohybrid and micro-hybrid composite resins following the use of a simplified polishing system

Hosseini Fadabobeh, Seyedeh Parvin, Mehrdad Kazemian, Malekipour Esfahani, M. R

Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering · 07.02.2023

DOI: 10.71939/jsme.2023.1092062 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, erschienen am 07.02.2023. Verfasst von Hosseini Fadabobeh und 4 weiteren Autor:innen.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This in vitro experimental study compared the average surface roughness (Ra value) of Z250 microhybrid and Z350 nanohybrid composite resins following polishing with the EVE simplified polishing system versus the multi-step Sof-Lex discs. Ninety-six composite discs (8 x 2 mm) were randomly divided into four subgroups: control (surface under the Mylar strip, no finishing/polishing), polishing with Sof-Lex discs, polishing with EVE discs, and polishing with EVE discs + EVE polishing paste. Prior to polishing, the specimens were ground with 1200-grit silicon carbide abrasive paper. The average surface roughness of each specimen was measured before (baseline) and after polishing using a profilometer. The results were analyzed using ANOVA and Bonferroni tests. The control subgroups showed the smoothest surfaces. A significant difference in surface roughness was found in the Z350 subgroups, with the Sof-Lex system yielding the roughest surface (P

Schlagwörter

surface roughnesscomposite resinnanohybrid composite resinmicrohybrid compositefinishing and polishingZ250Z350polishing paste

Zitieren

APA

Fadabobeh, H., Parvin, S., Kazemian, M., Esfahani, M., & R, M. (2023). Investigating on surface roughness of nanohybrid and micro-hybrid composite resins following the use of a simplified polishing system. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering. https://doi.org/10.71939/jsme.2023.1092062

Vancouver

Fadabobeh H, Parvin S, Kazemian M, Esfahani M, R M. Investigating on surface roughness of nanohybrid and micro-hybrid composite resins following the use of a simplified polishing system. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering. 2023. doi:10.71939/jsme.2023.1092062

BibTeX
@article{Fadabobeh2023,
  author = {Fadabobeh, Hosseini and Parvin, Seyedeh and Kazemian, Mehrdad and Esfahani, Malekipour and R, M.},
  title = {Investigating on surface roughness of nanohybrid and micro-hybrid composite resins following the use of a simplified polishing system},
  journal = {Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering},
  year = {2023},
  doi = {10.71939/jsme.2023.1092062}
}
Kostenlos starten →