EUVIMEDEUVIMED entdecken
Crossref

INFLUENCE OF Sn ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Ti-Mo-Nb ALLOYS FOR ORTHOPAEDIC APPLICATIONS

Noluntu Muchavi, Lerato Ranganya, Ronald maChaka, Glenda Motsi, Elizabeth Makhatha

South African Journal of Industrial Engineering · 2022 · 32 (3)

DOI: 10.7166/33-3-2806 ↗

Kurz gefasst

Fachartikel in der Zeitschrift South African Journal of Industrial Engineering, 2022. Verfasst von Noluntu Muchavi und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metastable ß-Ti alloys intended for orthopaedic implants typically possess undesirable α′, α″, ω precipitates, which increase the elastic modulus. Non-toxic Sn was reported as an effective suppressor of α′, α″ and ω precipitates. Furthermore, increasing Sn content was reported to decrease the elastic modulus. In this study, the cluster plus glue atom (CPGA) model was used to develop structurally stable ß-Ti alloys through the addition of Sn. Arc melting was conducted to fabricate the alloys. The effect of substituting Mo atoms with 0.4 and 0.5 Sn atoms on the microstructure and mechanical properties of [(Mo,Sn)(Ti)14](Nb)1 alloys was investigated. The microstructure of the alloys exhibited large equiaxed beta grains with the [(Mo0.6Sn0.4)(Ti)14](Nb)1 and [(Mo0.5Sn0.5)(Ti)14](Nb)1 alloys showing substructures. The XRD results showed that the alloys consisted of the β phase; however, the presence of α” was observed in the [(Mo0.6Sn0.4)(Ti)14](Nb)1 alloy. The study showed that substitution of 0.5 Mo atoms with 0.5 atoms of Sn to form the [(Mo0.5Sn0.5)(Ti)14](Nb)1 cluster resulted in an elastic modulus of 49 GPa.

Zitieren

APA

Muchavi, N., Ranganya, L., maChaka, R., Motsi, G., & Makhatha, E. (2022). INFLUENCE OF Sn ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Ti-Mo-Nb ALLOYS FOR ORTHOPAEDIC APPLICATIONS. South African Journal of Industrial Engineering, 32(3). https://doi.org/10.7166/33-3-2806

Vancouver

Muchavi N, Ranganya L, maChaka R, Motsi G, Makhatha E. INFLUENCE OF Sn ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Ti-Mo-Nb ALLOYS FOR ORTHOPAEDIC APPLICATIONS. South African Journal of Industrial Engineering. 2022;32(3). doi:10.7166/33-3-2806

BibTeX
@article{Muchavi2022,
  author = {Muchavi, Noluntu and Ranganya, Lerato and maChaka, Ronald and Motsi, Glenda and Makhatha, Elizabeth},
  title = {INFLUENCE OF Sn ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Ti-Mo-Nb ALLOYS FOR ORTHOPAEDIC APPLICATIONS},
  journal = {South African Journal of Industrial Engineering},
  year = {2022},
  volume = {32},
  number = {3},
  doi = {10.7166/33-3-2806}
}
Kostenlos starten →