EUVIMEDEUVIMED entdecken
Crossref

CFD Investigation of Flow Uniformity Index (FUI) and Pressure Drop Sensitivity to Perforated Plate Location in Diesel Oxidation Catalysts

Drai Gunathilaka, Nikhil R. Bhamare

ThyssenKrupp techforum · 30.08.2026 · 2026 (3) · 1-13

DOI: 10.71448/tk202631 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ThyssenKrupp techforum, online erschienen am 30.08.2026. Verfasst von Drai Gunathilaka und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The stringency of emission regulations requires highly efficient exhaust after-treatment systems in internal combustion engines. This paper uses three-dimensional Computational Fluid Dynamics (CFD), a simulation tool for analyzing fluid flow, to optimize the aerodynamic properties of a Diesel Oxidation Catalyst (DOC) assembly, a device that converts harmful gases in diesel exhaust into less harmful substances. A parametric analysis of the effect of the perforated plate-to-DOC separation distance (20 mm to 35 mm) on the flow hydrodynamics at six engine mass flow rates (0.10 kg/s to 0.35 kg/s) was performed using ANSYS Fluent, a CFD software, with the Realizable kE turbulence model, which is a specific mathematical model for simulating turbulence. The main aim was to maximize the Flow Uniformity Index (FUI), a measure of how evenly exhaust gases are distributed, and minimize back-pressure penalties, which refer to resistance to exhaust flow that can affect engine performance. At the nominal load of 0.20 kg/s, the results showed that the optimized 35 mm configuration reached an FUI of 0.913, which is 8.04% better than the base configuration and exceeds the critical industry efficiency threshold of 0.90. Also, this design lowered the pressure drop to 1.945 kPa by decreasing the upstream aerodynamic blockage by 3.04% (from 2.006 kPa to 1.945 kPa). The paper finds that the optimal geometric trade-off is a 35 mm spacing, which ensures equal catalyst utilization and allows the system to operate without affecting engine performance.

Zitieren

APA

Gunathilaka, D., & Bhamare, N. R. (2026). CFD Investigation of Flow Uniformity Index (FUI) and Pressure Drop Sensitivity to Perforated Plate Location in Diesel Oxidation Catalysts. ThyssenKrupp techforum, 2026(3), 1-13. https://doi.org/10.71448/tk202631

Vancouver

Gunathilaka D, Bhamare NR. CFD Investigation of Flow Uniformity Index (FUI) and Pressure Drop Sensitivity to Perforated Plate Location in Diesel Oxidation Catalysts. ThyssenKrupp techforum. 2026;2026(3):1-13. doi:10.71448/tk202631

BibTeX
@article{Gunathilaka2026,
  author = {Gunathilaka, Drai and Bhamare, Nikhil R.},
  title = {CFD Investigation of Flow Uniformity Index (FUI) and Pressure Drop Sensitivity to Perforated Plate Location in Diesel Oxidation Catalysts},
  journal = {ThyssenKrupp techforum},
  year = {2026},
  volume = {2026},
  number = {3},
  pages = {1--13},
  doi = {10.71448/tk202631}
}
Kostenlos starten →