Effect of Process Parameters on Mechanical Properties of Friction Stir Welded AA6061-T6 Alloy
Manufacturing and Automation · 18.01.2025 · 1-10
DOI: 10.71443/ma.ar19 ↗Kurz gefasst
Fachartikel in der Zeitschrift Manufacturing and Automation, online erschienen am 18.01.2025. Verfasst von Sathees T und 4 weiteren Autor:innen.
Abstract (Originalsprache)
Friction Stir Welding (FSW) is a solid-state joining process frequently employed to join aluminum alloys because it offers defect-free joints with excellent mechanical properties. This work examines the influence of welding parameters on the mechanical properties of AA6061-T6 aluminum alloy welds. A Taguchi L16 orthogonal array was employed to study the effect of rotational speed, traverse speed, axial force, and tool tilt angle. A constant geometry H13 steel tool was used to perform experiments, and tensile strength, microhardness, and percentage elongation were measured. The outcomes demonstrate that all the process parameters have a profound influence on the weld quality, but rotational speed is found to be the most influential, followed by axial force, traverse speed, and tool tilt angle as per ANOVA analysis. A nonlinear trend of mechanical properties was observed as a result of interaction effects between heat input, material flow, and deformation. The best combination of process parameters (1400 rpm, 60 mm/min, 6 kN, and 1°) produced the highest tensile strength (235 MPa), hardness (83 HV), and elongation (13%). These improved mechanical properties are due to better mixing and dynamic recrystallization in the stir zone. The research shows that the choice of process parameters is essential to produce high-quality friction stir-welded joints in AA6061-T6 aluminum alloy.
Zitieren
APA
T, S., M, D., V, D., R, D., & D, S. (2025). Effect of Process Parameters on Mechanical Properties of Friction Stir Welded AA6061-T6 Alloy. Manufacturing and Automation, 1-10. https://doi.org/10.71443/ma.ar19
Vancouver
T S, M D, V D, R D, D S. Effect of Process Parameters on Mechanical Properties of Friction Stir Welded AA6061-T6 Alloy. Manufacturing and Automation. 2025:1-10. doi:10.71443/ma.ar19
BibTeX
@article{T2025,
author = {T, Sathees and M, Dhanush and V, Dinesh and R, Degarasan and D, Shanmugavelan},
title = {Effect of Process Parameters on Mechanical Properties of Friction Stir Welded AA6061-T6 Alloy},
journal = {Manufacturing and Automation},
year = {2025},
pages = {1--10},
doi = {10.71443/ma.ar19}
}
EUVIMED