Comparative Groundwater Quality Assessment Using the Nemerow Pollution Index and the Canadian CCME Water Quality Index in Tikrit, Iraq
Al-Noor Journal of Engineering Management and Computer Science · 08.07.2026 · 38-54
DOI: 10.71229/nn479392 ↗Kurz gefasst
Fachartikel in der Zeitschrift Al-Noor Journal of Engineering Management and Computer Science, online erschienen am 08.07.2026. Verfasst von Aisha Thair Ali und 1 weiteren Autor:innen. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
Groundwater in arid and semi-arid settings is often controlled by the combined influence of lithological dissolution, evaporation, return flow from irrigation and groundwater abstraction. This paper provides a comparative assessment of groundwater quality in the Tikrit area, Salah al-Din Governorate, Iraq, using two complementary index models, i.e., the Nemerow Pollution Index (NPI) and the Canadian Council of Ministers of the Environment Water Quality Index (CCME-WQI). Physicochemical parameters like pH, turbidity, EC, TDS, total hardness, major cations, major anions, nitrate, and phosphate were measured in six groundwater wells (W1–W6). To measure the severity of pollution, the NPI model, which combines average single-factor pollution index and maximum pollution factor, was used. The CCME-WQI model was used to summarize the scope, frequency, and amplitude of guideline exceedances. The NPI values ranged from 2.83 to 6.41, and W2 and W6 were classified as moderately polluted, and W1, W3, W4, and W5 were classified as seriously polluted. The CCME-WQI values ranged from 28.59 to 53.13, indicating poor suitability for drinking water for W1, W3, W4 and W5, and marginal suitability for W2 and W6. The overall poor status of the study area was revealed by the regional CCME-WQI of 34.58. Both models identified W5, W3 and W4 as priority wells, but focused on different aspects of deterioration: NPI emphasized the dominance of a single parameter, especially Na+ at W5 and SO4 2- at W3 and W4, whereas CCME-WQI captured the broader multi-parameter failure structure. The irrigation indices showed that all wells are under very high salinity class (C4) with W5 showing combined salinity-sodicity constraint (C4-S3). Thus, the combined NPI-CCME approach provides a more defensible interpretation of groundwater degradation than either model alone, and supports targeted management decisions for drinking-water treatment, irrigation restriction and long-term monitoring.
Zitieren
APA
Ali, A. T., & Taha, M. (2026). Comparative Groundwater Quality Assessment Using the Nemerow Pollution Index and the Canadian CCME Water Quality Index in Tikrit, Iraq. Al-Noor Journal of Engineering Management and Computer Science, 38-54. https://doi.org/10.71229/nn479392
Vancouver
Ali AT, Taha M. Comparative Groundwater Quality Assessment Using the Nemerow Pollution Index and the Canadian CCME Water Quality Index in Tikrit, Iraq. Al-Noor Journal of Engineering Management and Computer Science. 2026:38-54. doi:10.71229/nn479392
BibTeX
@article{Ali2026,
author = {Ali, Aisha Thair and Taha, Mohammed},
title = {Comparative Groundwater Quality Assessment Using the Nemerow Pollution Index and the Canadian CCME Water Quality Index in Tikrit, Iraq},
journal = {Al-Noor Journal of Engineering Management and Computer Science},
year = {2026},
pages = {38--54},
doi = {10.71229/nn479392}
}
EUVIMED