EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-SA 4.0

Load–Displacement Behavior of Inclined Screw Piles in Sand under Different Centrifuge Acceleration Levels

Ahmed Hussein

Al-Noor Journal of Engineering Management and Computer Science · 20.07.2026 · 236-245

DOI: 10.71229/90d6hn30 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Al-Noor Journal of Engineering Management and Computer Science, online erschienen am 20.07.2026. Verfasst von Ahmed Hussein. Die Arbeit nennt 16 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper presents a study of the uplift behaviour of screw pile models embedded in dry sandy soil under inclined tensile loading by small scale and centrifuge modelling. The tested screw pile had a helix diameter of Dh=2d, a spacing ratio of S/Dh=3, and an embedment depth of 400 mm. Tests were conducted at a relative density of 55% under 1g, 5g, 10g, and 15g acceleration levels. Three tensile load inclination angles, 30∘, 60∘ and 90∘, were considered. A pipe pile without helices was tested as a reference case to evaluate the improvement ratio (Q/Qo). The ultimate uplift capacity was determined using a displacement-based criterion corresponding to 10% of the helix diameter. The results showed that uplift capacity increased with both load inclination angle and centrifuge acceleration level. The maximum capacity was recorded for vertical tensile loading (90°) reaching 240 kN at 15g. The improvement ratio also increased with the acceleration level and load angle with the maximum value of 20.8 at 90∘ and 15g. The results indicate that the application of the helical plates considerably improves the tensile strength, especially in the vertical loading case and higher stress.

Zitieren

APA

Hussein, A. (2026). Load–Displacement Behavior of Inclined Screw Piles in Sand under Different Centrifuge Acceleration Levels. Al-Noor Journal of Engineering Management and Computer Science, 236-245. https://doi.org/10.71229/90d6hn30

Vancouver

Hussein A. Load–Displacement Behavior of Inclined Screw Piles in Sand under Different Centrifuge Acceleration Levels. Al-Noor Journal of Engineering Management and Computer Science. 2026:236-245. doi:10.71229/90d6hn30

BibTeX
@article{Hussein2026,
  author = {Hussein, Ahmed},
  title = {Load–Displacement Behavior of Inclined Screw Piles in Sand under Different Centrifuge Acceleration Levels},
  journal = {Al-Noor Journal of Engineering Management and Computer Science},
  year = {2026},
  pages = {236--245},
  doi = {10.71229/90d6hn30}
}
Kostenlos starten →