Embodied Carbon and Compressive Strength Assessment of Limestone Calcined Clay Concrete Incorporating Thermally Activated Iraqi Kaolin
Al-Noor Journal of Engineering Management and Computer Science · 18.08.2026 · 254-262
DOI: 10.71229/67p22h47 ↗Kurz gefasst
Fachartikel in der Zeitschrift Al-Noor Journal of Engineering Management and Computer Science, online erschienen am 18.08.2026. Verfasst von Zahraa Tahseen Hamza und 1 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
The production of Portland cement is a major source of global carbon dioxide (CO₂) emissions, mainly because of the high energy demand and calcination processes involved in clinker production. This study evaluates the embodied carbon emissions of Limestone calcined clay cement (LC3) concrete produced using locally available Iraqi limestone and thermally activated kaolin. Seven concrete mixtures were considered, including one ordinary Portland cement (OPC) reference mixture and six LC3 mixtures incorporating 15–20% limestone powder and 30-35% thermally activated kaolin. Two kaolin activation levels were investigated: low reactive kaolin and highly reactive kaolin. The embodied carbon of each mixture was calculated in a simplified way by employing factors obtained from published literature and recognized databases. The calculated results indicated that all LC3 mixtures achieved significant reductions in embodied carbon emissions compared with the reference mixture, ranging from 38.0% to 49.3%. the LC3 mixture with 20% limestone powder and 30% highly reactive kaolin had the lowest embodied carbon emissions of 13.11 kg CO₂ per experimental mixture and a compressive strength of 32.55 MPa, providing the best balance between environmental performance and mechanical strength among the investigated LC3 mixtures. increasing cement content from 50% to 55% increased the embodied carbon, while the use of highly reactive kaolin generally resulted in higher emissions. The results demonstrate that locally available Iraqi limestone and kaolin can be effectively used to produce low-carbon LC3 systems and provide practical guidance for optimizing binder composition and clay activation to reduce the embodied carbon of cementitious materials.
Zitieren
APA
Hamza, Z. T., & Borhan, T. M. (2026). Embodied Carbon and Compressive Strength Assessment of Limestone Calcined Clay Concrete Incorporating Thermally Activated Iraqi Kaolin. Al-Noor Journal of Engineering Management and Computer Science, 254-262. https://doi.org/10.71229/67p22h47
Vancouver
Hamza ZT, Borhan TM. Embodied Carbon and Compressive Strength Assessment of Limestone Calcined Clay Concrete Incorporating Thermally Activated Iraqi Kaolin. Al-Noor Journal of Engineering Management and Computer Science. 2026:254-262. doi:10.71229/67p22h47
BibTeX
@article{Hamza2026,
author = {Hamza, Zahraa Tahseen and Borhan, Tumadhir Merawi},
title = {Embodied Carbon and Compressive Strength Assessment of Limestone Calcined Clay Concrete Incorporating Thermally Activated Iraqi Kaolin},
journal = {Al-Noor Journal of Engineering Management and Computer Science},
year = {2026},
pages = {254--262},
doi = {10.71229/67p22h47}
}
EUVIMED