Assessment of Properties of Fiber-Modified Asphalt Mixtures
Al-Noor Journal of Engineering Management and Computer Science · 22.11.2026 · 577-590
DOI: 10.71229/0v1bg422 ↗Kurz gefasst
Fachartikel in der Zeitschrift Al-Noor Journal of Engineering Management and Computer Science, online erschienen am 22.11.2026. Verfasst von Ahmed AL-Bdairi. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-SA 4.0).
Abstract (Originalsprache)
The performance of hot mix asphalt (HMA) pavements is significantly affected by heavy traffic loading and high-temperature conditions, particularly in regions with hot climates such as Iraq. Fiber reinforcement has been investigated as an effective approach to improving the mechanical properties of asphalt mixtures. This study experimentally evaluates the effects of hybrid combinations of steel, glass, and polypropylene fibers on the performance of HMA prepared using 40–50 penetration-grade asphalt binder obtained from Al-Daurah refinery. Three hybrid fiber systems were investigated: glass–steel, polypropylene–glass, and polypropylene–steel. Each system was evaluated using five fiber proportions, namely 0.4–0, 0.3–0.1, 0.2–0.2, 0.1–0.3, and 0–0.4%, based on the total weight of the asphalt mixture. The optimum asphalt content was determined to be 5%. The experimental programme included Marshall Stability, Marshall Flow, and Indirect Tensile Strength (ITS) tests to assess the influence of fiber type and proportion on mixture performance. The results demonstrated that hybrid fiber reinforcement improved the mechanical properties of HMA, although the degree of improvement varied depending on the fiber combination and proportion. The polypropylene–steel combination exhibited the highest overall performance, achieving a maximum Marshall Stability of 23.86 kN and an ITS of 2.47 MPa at a fiber proportion of 0.3–0.1%, representing increases of approximately 44.7% and 27.3%, respectively, compared with the control mixture. The polypropylene–glass combination also showed considerable improvements, while the glass–steel combination provided moderate enhancements. Marshall Flow values exhibited relatively small variations among the investigated mixtures. Overall, the findings highlight the potential of hybrid fiber reinforcement, particularly polypropylene–steel fibers, for enhancing the stability and tensile strength of HMA under the investigated laboratory conditions.
Zitieren
APA
AL-Bdairi, A. (2026). Assessment of Properties of Fiber-Modified Asphalt Mixtures. Al-Noor Journal of Engineering Management and Computer Science, 577-590. https://doi.org/10.71229/0v1bg422
Vancouver
AL-Bdairi A. Assessment of Properties of Fiber-Modified Asphalt Mixtures. Al-Noor Journal of Engineering Management and Computer Science. 2026:577-590. doi:10.71229/0v1bg422
BibTeX
@article{ALBdairi2026,
author = {AL-Bdairi, Ahmed},
title = {Assessment of Properties of Fiber-Modified Asphalt Mixtures},
journal = {Al-Noor Journal of Engineering Management and Computer Science},
year = {2026},
pages = {577--590},
doi = {10.71229/0v1bg422}
}
EUVIMED