EUVIMEDEUVIMED entdecken
Crossref

Enhancing the Properties of Aluminum AA-1100: The Effect of Mg and Copper Additives with Heat Treatment

Bima Wahyu Saputra BIMA, Bambang Junipitoyo

SAINSTECH NUSANTARA · 2025

DOI: 10.71225/jstn.v2i1.62 ↗

Kurz gefasst

Fachartikel in der Zeitschrift SAINSTECH NUSANTARA, 2025. Verfasst von Bima Wahyu Saputra BIMA und 1 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Aluminum alloys, renowned for their low density, high strength, and corrosion resistance, are widely utilized in industries such as aerospace. However, Aluminum 1100 is typically too soft, which necessitates the addition of alloying elements like magnesium (Mg) and copper (Cu) to improve its mechanical properties. This study examines the effects of adding 1.2% magnesium and varying copper concentrations (3.9%, 4.1%, and 4.3%) to Aluminum 1100, followed by heat treatment at 100°C, 200°C, 300°C, and 400°C for 120 minutes. The physical properties, including density, as well as mechanical properties—tensile strength and Vickers hardness—were evaluated. The results revealed that the highest density (3.408 g/cm³) occurred at 300°C with 1.2% Mg and 4.1% Cu. The maximum tensile strength (130.7948 MPa) was observed in the alloy with 4.3% Cu at 400°C, while the highest strain (0.03995%) was recorded at 300°C with 4.3% Cu. The lowest modulus of elasticity (2635.292 MPa) was measured at 100°C with 4.3% Cu, and the highest value (4162.763 MPa) was obtained at 200°C with 4.1% Cu. Additionally, the highest Vickers hardness (90.27 HVN) was achieved in the alloy containing 1.2% Mg and 4.3% Cu at 400°C.

Zitieren

APA

BIMA, B. W. S., & Junipitoyo, B. (2025). Enhancing the Properties of Aluminum AA-1100: The Effect of Mg and Copper Additives with Heat Treatment. SAINSTECH NUSANTARA. https://doi.org/10.71225/jstn.v2i1.62

Vancouver

BIMA BWS, Junipitoyo B. Enhancing the Properties of Aluminum AA-1100: The Effect of Mg and Copper Additives with Heat Treatment. SAINSTECH NUSANTARA. 2025. doi:10.71225/jstn.v2i1.62

BibTeX
@article{BIMA2025,
  author = {BIMA, Bima Wahyu Saputra and Junipitoyo, Bambang},
  title = {Enhancing the Properties of Aluminum AA-1100: The Effect of Mg and Copper Additives with Heat Treatment},
  journal = {SAINSTECH NUSANTARA},
  year = {2025},
  doi = {10.71225/jstn.v2i1.62}
}
Kostenlos starten →