Research and Engineering Implementation of Motion Physical-Quantity Feedback-Based Speed Compensation Control Technology for Precision Liquid Delivery in IVD Medical Equipment
International Journal of Engineering Advances · 16.11.2026 · 3 (2) · 83-92
DOI: 10.71222/vztkkk27 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Engineering Advances, online erschienen am 16.11.2026. Verfasst von Yanfeng He.
Abstract (Originalsprache)
Precision liquid delivery is a critical capability in In Vitro Diagnostics (IVD) medical equipment, essential for sample dispensing, reagent distribution, and microfluidic driving. However, periodic fluctuations, repeatability errors, and nonuniform advancement during liquid delivery severely compromise dispensing accuracy and test consistency. Conventional continuous speed control and standard closed-loop systems struggle to effectively compensate for mechanical structural errors, lead-screw periodic errors, motor microstepping inaccuracies, and fluidic-load disturbances. To overcome these challenges, this paper proposes a novel motion physical-quantity feedback-based speed compensation control method for precision liquid delivery mechanisms. The proposed approach divides the motor-driving process into discrete motion units, assigning independent speed parameters to form a dynamically correctable execution sequence. During operation, actual motion results are acquired via physical quantities such as encoder period, flow rate, pressure, and displacement. Compensation coefficients are calculated from target deviations to correct subsequent motion units. Furthermore, multi-cycle learning is employed for highly repeatable systematic errors to generate a stable speed compensation table. Experimental validation using an IVD precision syringe pump system demonstrates significant reductions in encoder-disk periodic fluctuation and liquid-output nonuniformity. Following compensation, the coefficient of variation (CV) decreased from approximately 0.6% to 0.05%, representing a tenfold improvement in system stability. Ultimately, this method offers low implementation complexity, robust engineering adaptability, and embedded deployability, providing a highly stable, practically implementable motion-control solution for precision dispensing and multi-channel liquid control in modern IVD medical equipment.
Zitieren
APA
He, Y. (2026). Research and Engineering Implementation of Motion Physical-Quantity Feedback-Based Speed Compensation Control Technology for Precision Liquid Delivery in IVD Medical Equipment. International Journal of Engineering Advances, 3(2), 83-92. https://doi.org/10.71222/vztkkk27
Vancouver
He Y. Research and Engineering Implementation of Motion Physical-Quantity Feedback-Based Speed Compensation Control Technology for Precision Liquid Delivery in IVD Medical Equipment. International Journal of Engineering Advances. 2026;3(2):83-92. doi:10.71222/vztkkk27
BibTeX
@article{He2026,
author = {He, Yanfeng},
title = {Research and Engineering Implementation of Motion Physical-Quantity Feedback-Based Speed Compensation Control Technology for Precision Liquid Delivery in IVD Medical Equipment},
journal = {International Journal of Engineering Advances},
year = {2026},
volume = {3},
number = {2},
pages = {83--92},
doi = {10.71222/vztkkk27}
}
EUVIMED