EUVIMEDEUVIMED entdecken
Crossref

Excess Heat and Influences of Temperature and Atmosphere on the Microstructure of Pd-Ni-Zr Alloy Nanopowders

Yanxia Liang, Hui Zhao, Linghui Hou, Dahai Liu, Xinhua Ma, Junli Hou, Wuyun Xiao, Wu-Shou Zhang

Journal of Condensed Matter Nuclear Science · 02.06.2026 · 41

DOI: 10.70923/001c.163385 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Condensed Matter Nuclear Science, online erschienen am 02.06.2026. Verfasst von Yanxia Liang und 7 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Pd-Ni-Zr alloy has been identified as one of the most promising materials for low-energy nuclear reactions (LENR). The simple and efficient fabrication of the Pd-Ni-Zr alloy, in conjunction with systematic investigations into its control factors, significantly advances the progress of LENR. In this study, Pd-Ni-Zr alloy nanopowders with different compositions were prepared by high energy ball milling and subjected to heat treatment including high-temperature vacuum annealing, high-temperature oxidation and deuterium reduction. The grain refinement process of Pd-Ni-Zr alloy nanopowder was explored based on different ball milling times. The deuterium reduction of Pd-Ni-Zr samples prepared under different ball-milling conditions reached a minimum of 27 nm, accompanied by a high density of defects including dislocations, interfaces, and amorphous structure. From the results of scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD), the influence of temperature and atmosphere on the morphology, phase structure, and crystallinity of Pd-Ni-Zr alloy was revealed. Excess heat of Pd-Ni-Zr alloy nanopowder in D2 was assessed with a high-precision Seebeck calorimeter. Results demonstrate that both the activation treatment (involving high-temperature oxidation and deuterium reduction) and the stepwise variation of reaction temperature are critical factors for enhancing the excess heat of Pd-Ni-Zr alloy. Excess power of 0.6 W (or 120 W/kg of the sample) was obtained with the optimized Pd-Ni-Zr alloy samples.

Zitieren

APA

Liang, Y., Zhao, H., Hou, L., Liu, D., Ma, X., Hou, J., Xiao, W., & Zhang, W. (2026). Excess Heat and Influences of Temperature and Atmosphere on the Microstructure of Pd-Ni-Zr Alloy Nanopowders. Journal of Condensed Matter Nuclear Science, 41. https://doi.org/10.70923/001c.163385

Vancouver

Liang Y, Zhao H, Hou L, Liu D, Ma X, Hou J, et al. Excess Heat and Influences of Temperature and Atmosphere on the Microstructure of Pd-Ni-Zr Alloy Nanopowders. Journal of Condensed Matter Nuclear Science. 2026;41. doi:10.70923/001c.163385

BibTeX
@article{Liang2026,
  author = {Liang, Yanxia and Zhao, Hui and Hou, Linghui and Liu, Dahai and Ma, Xinhua and Hou, Junli and Xiao, Wuyun and Zhang, Wu-Shou},
  title = {Excess Heat and Influences of Temperature and Atmosphere on the Microstructure of Pd-Ni-Zr Alloy Nanopowders},
  journal = {Journal of Condensed Matter Nuclear Science},
  year = {2026},
  volume = {41},
  doi = {10.70923/001c.163385}
}
Kostenlos starten →